VIPowER VPA-3528Net user manual Step

ViPowER / VPA-3528Net User`s Manual

Note :

(a)“Inner Cradle with Front Cover, PCB and HDD”=”Inner Cradle Assembly”.

(b)In order to Stabilize and NOT Rock the Inner Cradle Assembly assembled in the Body Outer Cover with rear panel.

There are four front and rear bulges in the side of the Inner Cradle (two in each side), and two jogs in the inside of the Body Outer Cover (one in each inside).

(c)Put the bulges between the jogs and the bottom of the Body Outer Cover.

(2)Carefully slide the Inner Crale Assembly back into the Body Outer Cover with rear panel.

Step 7.

Replace the two screws which were removed in Step 1 from the back of the VPA-3528Net NetWork Storage.

Step 8.

Place the Rubber Stands on the downside of the VPA-3528Net NetWork Storage, and position the Rubber Stand Location Positioner into the Rubber Stand Location Holes on the downside of the NetWork Storage.

ViPowER / 3.5-inch Aluminum HDD NetWork Storage 11