Victor Technology 1260-3 instruction manual Setting the Time

31. SETTING THE TIME

Set Slide Switches as Example Below: EXAMPLE: Set TIME to 4:37 PM

Step #	Enter	Depress This Key	Your Display Will Show	Tape Will Read
1.		Clear Key (CE/C)	0.	0.C
2.		TIME/DATE Key and hold	Flashing Numbers in This Format -
		until display flashes	MM-DD-YYYY
3.		Tap TIME/DATE key to	Flashing Numbers in This
		switch to Time Mode	Format – HH-MM-SS
4.	16		16
5.	37		1637
6.		Tap TIME/DATE Key	P 04-37-00
7.		#/S Key	P 04-37-00	#•04 •37

Decimal	Rounding	Σ	GT	Print
2	5/4	.	.	PRINT

1.Depress the CE/C key. Your display with show 0. and the tape will read 0.C.

2.Depress the TIME/DATE key and hold until the display is flashing.

3.Tap the TIME/DATE key to go to Time Mode.

4.Enter the hour, in our example 16 in military time. Your display will show 16.

5.Enter the minutes, in our example 37. Your display will show 1637.

6.Tap the TIME/DATE key to set the TIME. Your display will now show P 04-37-00 and the seconds will begin counting.

7.To PRINT the TIME, depress the (#/S) key, your tape will show #•04•37.

NOTE: On the PRINT on the paper tape, the dot in front (#•07•05) means PM, there will be no dot printed for AM.

28