Victor Technology 1260-3 instruction manual Troubleshooting, Item Count Key

Page 11
It prints but does not clear the accumulator.
Total Key
Prints and clears the accumulator. When this key is pressed with the “GT” switch is on, the result is accumulated automatically in the memory register.
Memory Total key
Prints and clears the memory.

25. [N] Item Count Key

Calculations with item count and/or averaging. Also used to set the N count to Gross or Net.

26. [# / S] Date / Subtotal Key

#: It will print live entry as an identifier as an invoice number with “#” mark.

S :

27. [T]

28. [MT]

29. [MS] Memory Subtotal key

Prints but do not clear the memory.

30. [M-] Memory Minus key

Subtracts an amount from memory. If there is a live calculation pending, the Memory Minus key will complete the calculation and subtract the amount from Memory.

31. [M+] Memory Plus key

Adds an amount to memory. If there is a live calculation pending, the Memory plus key will complete the calculation and accumulate the result to Memory.

32. [], [=] Square Root key

By pressing the and then the = key, the square root result will be achieved.

TROUBLESHOOTING

Many problems such as no power, no key response etc. Can be resolved using the RESET button. Please follow these instructions:

1.Machine must be plugged in and ON, and in the PRINT mode.

2.Turn machine over so you can see the battery compartment.

3.Open the battery compartment and locate the RESET button located next to the silver battery.

4.Depress the RESET button; you will hear the machine cycle. If you do not hear the machine recycle, push the button a 2nd time.

5.Replace the battery compartment cover and turn the machine right side up.

6.Test the machine.

If this procedure has not successfully resolved your problem please call 1-800-628-2420 for future assistance.

10

Image 11
Contents Victor Table of Contents Activate Backup Battery Operations and MaintenanceReplacing INK Ribbon HOW to Feed the Paper TapePress the Reset Button Battery ReplacementKeyboard Layout Page F 0 2 3 4 Decimal Point Selector Slide Switch FeaturesGrand Total Switch KEY FeaturesPercent key Item Count Key TroubleshootingDecimal Rounding Calculation Enter Application ExamplesItem count is Programmable for Gross Count or Net Count Paper 11.32 Paper 23.55 004 Paper 210 500 324 = Paper 10.00 ∗ 12.00 ∗ 755 ⎟ 4 = 755.00 409 ⎟ 4 = 188.75 32 ⎟ 4 = 102.25 CE/C Preset TAX 1 = 7.5% Press & Hold 3 secRATE 261.56 50 % 19.62 Δ 281.18 ∗ VAT including TAX 1 and TAX 200 252.20 Paper 169.50 14.00 % 23.73 Paper 60.00 130.00 70.00 Gross Profit Margin Calculation COST-SELL-MARGIN Quantity Price Net Given Find CE/C 100 + 200 = ? 900 300 20 X 12 X Total 500 400 140 Set Slide Switches as Example Below Setting the Time Technical Specifications Victor Technology Name Date Address City State Zip Victor Technology West Belden Avenue Addison, IL Victor Technology