Osprey 240e/450e User Guide
Video Decoder tab
The Video Decoder tab is a Microsoft DirectShow standard control for setting the NTSC/PAL/SECAM video standards (Figure 18). We discussed NTSC while discussing the Input tab. PAL and SECAM are standards used in Europe and other parts of the world. Your Osprey cards can function in computers in various countries with different standards.
Figure 18. Video Decoder tab
Changes apply to all video previews and stream captures on the currently selected device. If you have multiple Osprey cards, you can set the input individually for each of them. Changes made with this control take effect immediately. If video is running and a standard is selected that does not match the incoming signal, the video is likely to freeze or glitch until the signal matches the correct standard.
ViewCast | 21 |