ViewCast Osprey-450e, Osprey-240e manual Device tab

Page 44

Setting Driver Properties

∙If the content format is a rapidly changing mix of telecine and video, or is all video, or is of unknown type, the Motion Adaptive setting gives the most consistent results. The quality of telecine sequences is not the best possible, but there are no instances of frames not deinterlaced at all due to telecine re-locking.

Device tab

Device controls (Figure 33) are less often used items. Unless specifically noted, changes made on this page apply to all filters and all video previews and capture pins on the currently selected device. Unless noted, different settings may be set and stored for different devices.

Figure 33. Device tab

The Device tab has the following controls.

No-Video Test

This control lets you select a pattern to display when no video signal

Pattern

is present.

 

 

Buffers

The driver indicates the minimum number of video capture buffers

Requested

needed to allocate for proper operation.

 

 

Diagnostic

For use by ViewCast Technical Support Only.

Logging

 

 

 

Extras …

Click this button to display the Extras dialog box (see Extras).

 

 

Device Info …

Click this button to display the Device Info dialog box (see Device

 

Info).

 

 

OK

Click OK to accept the settings.

 

 

Cancel

Click Cancel to reject the settings and close the window.

 

 

38

ViewCast

Page 43 Page 45
Image 44
Page 43 Page 45
Contents Osprey 240e/450e User Guide Page Contents Selecting the audio source and input volume Osprey 240e Environmental specifications Osprey 450e Page Limited Warranty OverviewWarranties Reseller Pass ThroughSystem requirements Minimum system requirementsInstallation Steps Installing the driverCustom installing AVStream Installing the video capture cardDigital Signature Not Found Window Page Setting Driver Properties Accessing the OspreyConfig UtilityOspreyConfig’s initial processing sequence Initial OspreyConfig user interfaceSelecting a device for configuration Control used to open the properties Understanding the device properties window Size and Crop CaptionsLogo OspreyConfig utility to access devices Devices and global controlsInput tab Input tabCancel Video InputVideo Present Video StandardOsprey 450e AV option hardware add-on-device Input Tab without AV optionVideo standard group Input Format group analog inputsNotch Kill Video Proc Amp tab VideoProc Amp TabColor Enable PowerLineFrequency Anti Flicker Default BrightnessVideo Decoder tab Video Decoder tabSignal Detected Output EnableLines detected VCR InputRefSize tab Horizontal Format Horizontal Delay Horizontal DelaySource Width Source WidthReference Size for Crop and Logo Placement Line Ntsc Vertical FormatSetting Driver Properties Currently Using Filters tabSimulStream DeinterlaceApply Help SimulStream SimulStream optionMultiple instances Show Filters Adjust… DeinterlaceInverse Telecine Motion AdaptiveCurrently Using group Motion adaptive deinterlaceSmooth Motion Adaptive Deinterlace windowMotion Threshold Test Mode Restore DefaultsSharp Motion CloseDevice tab No-Video Test Pattern Buffers RequestedDiagnostic logging ExtrasTimecode Video Marking Closed CaptionOsprey 240e/450e User Guide Device Info Device InfoCaptions tab Pin Select CC PinCapture PreviewRender Ntsc Closed Captions On Video Render Logical White AsCC Pin CC PinEnable Logo on File and Color sub Tab Enable Key ColorLogo tab On File and Color Sub tabSetting Driver Properties File and Color Pin SelectEnable Key Color Enable Key ColorWeighting Position and SizeLogo position and size Size and Crop tab Size and Crop tabReference Size Granularity Granularity Alignment Format Horizontal VerticalEnable Cropping Enable CroppingRecalc button Default Output Size Default Output SizeAVStream driver reference information DirectShowAVStream Driver Reference Information Post-Processing mode Post-Processing modeAVStream Driver Reference Information Preview Pin to Overlay Mixer to Video Renderer Efficient Video RenderingPreview Pin to Video Renderer Preview Pin to VMR7 Video Mixing RendererPreview Pin to VMR9 Some Data PointsAVStream Driver Reference Information Video standards and sizes Color formatsYUV format details Captioning via CC or VBI pins Closed captioning CCDirect CC rendering on video CC streaming interface Vertical Interval Timecode VitcVertical Blanking Interval VBI capture Timecode Video MarkingSelecting the audio source and input volume Audio driverAudio Driver Audio properties Audio propertiesAudio configuration Mono Source ModeAudio formats Audio playbackInput reference level Audio Driver Osprey 240e Appendix a Osprey hardware specificationsEnvironmental specifications Osprey 240e long backplate Osprey 450e Osprey 450e backplateAppendix a Osprey Hardware Specifications Mini-DIN Signal RCA Connectors Appendix B Osprey 450e audio cablePage Scrambled video image Appendix C TroubleshootingColor bars on video screen Cannot play back recorded audio Poor video quality at large frame sizesMultiple horizontal lines across video image Osprey 240e/450e User Guide Page Index Appendix C Troubleshooting Video rendering Viewcast.com

Osprey-450e, Osprey-240e specifications

The ViewCast Osprey series, particularly the Osprey-240e and Osprey-450e, represents a significant advancement in the field of video capture and encoding technology. These high-performance video capture cards are designed to meet the growing demands of professional broadcast environments, video production, and live streaming applications.

The Osprey-240e offers a compact design while delivering excellent performance. It is equipped with dual channel input capabilities, allowing users to capture multiple streams simultaneously. This feature is particularly beneficial for broadcasters and content creators looking to streamline their workflows. The Osprey-240e supports a variety of input formats including SDI and HDMI, ensuring compatibility with a wide range of video sources. Its robust encoding capabilities allow for real-time video streaming in HD resolution, making it suitable for live events, webinars, and other digital content delivery applications.

On the other hand, the Osprey-450e takes video capture to the next level with enhanced capabilities. It supports up to four channels of video input, making it an ideal solution for multi-camera setups. The Osprey-450e also boasts advanced encoding technologies that facilitate high-quality video compression without sacrificing performance. This model is particularly well-suited for enterprise-level applications where high-definition video quality is paramount. Users can experience lower latency and improved encoding efficiency, resulting in smoother viewing experiences for end-users.

Both models feature powerful drivers and software support that integrate seamlessly with a variety of video production and streaming applications. The Osprey series is designed with user-friendly interfaces, making it accessible for both seasoned professionals and newcomers alike. The cards are also compatible with many of the industry-standard software solutions, enabling users to harness the full potential of their video content.

These capture cards also prioritize reliability and durability, ensuring long operational life even under demanding conditions. Their efficient thermal management systems keep components cool during extended use, thereby enhancing performance consistency.

In summary, the ViewCast Osprey-240e and Osprey-450e deliver impressive features tailored for a range of video applications. Their support for multiple input channels, advanced encoding technologies, and strong software compatibility make them invaluable tools in the modern digital media landscape, solidifying their reputation among content creators and broadcasters alike.
Top Page Image Contents