VPI | VIDEO | 1275 Danner Drive Aurora,Ohio 44202 |
PRODUCTS | Tel: 330-562-7070 Fax: 330-562-1999 |
INCORPORATED | www.vpi.us |
| |
INSTALLATION GUIDE FOR THE
VOPEX-SV-2-LC
INTRODUCTION
The VOPEX-SV-2-LC S-Video Splitter allows two S-Video displays to be driven from the same S-Video source. The S-Video may come from sources such as a PC, DVD player, satellite receiver, or VCR to name a few. With 150 MHz bandwidth, the VOPEX-SV-2 supports standard S-Video resolution–up to 800 x 600.
INSTALLATION
1.Turn OFF power to source and display(s).
2.Disconnect the S-Video cable from the source and reconnect it to the female connector labeled "S-VIDEO OUT 1" on the VOPEX-SV-2-LC.
3.Install one male end of the SVEXT-3-MM cable (supplied) into the source’s S-Video output connector.
4.Install the other male end of the SVEXT-3-MM cable into the female connector labeled "S-VIDEO IN" on the VOPEX-SV-2-LC.
5.An additional display may be plugged into the remaining female connector labeled "S-VIDEO OUT 2" as required.
6.Plug in the AC adapter and connect it to the VOPEX-SV-2-LC.
7.Turn ON power to the source and display(s).
Note: Additional S-Video cable lengths (SVEXT-xx-MM where xx is the length of the cable in feet) may be ordered from Video Products Inc by calling (800) 626-7801 (U.S) or 330-562-7070 or visit our website at www.vpi.us.
S-Video Cable | AC Adapter |
(not supplied) | (supplied) |
S-Video Cable (not supplied)
S-VIDEO OUT 1 | | VPI | VIDEO- 5V IN 0.5A |
| | R |
| | |
S-VIDEO OUT2 | Video Products Inc |
| | S |
| VOPEX-SV-2-LC |
| | | |
Top View of VOPEX-SV-2-LC
SVEXT-3-MM | PC, DVD, Satellite, |
(supplied) | or VCR |
Left End View of VOPEX-SV-2-LC | Right End View of VOPEX-SV-2-LC |
|
TROUBLESHOOTING
PROBLEM | SOLUTION |
No Video | • Connect power to VOPEX-SV-2-LC |
| • Cable connections not secure |
Poor Resolution | • Make sure the display is plugged into S- |
| VIDEO IN on the VOPEX-SV-2-LC |