Quickstart Guide
NuQ series
|
| |
|
| Scaffold Clamp |
Flying yoke | ||
Pole Bracket | Wall Bracket |
|
| |||
Scaffold Clamp |
| Scaffold Clamp | |
| |||
FlyingYoke | |||
Twin Bar | |||
Swivel bracket |
|
| |
|
| ||
Extender Bar |
|
|
To install a loudspeaker using Turbosound brackets, first separate the brackets into their wall/ceiling plate and speaker plate component parts. Remove the two countersunk M10 bolts on the rear panel of the cabinet. Attach the speaker plate to the cabinet with the M8 bolts supplied. Fix the wall/ceiling plate in the venue using appropriate fixings (not supplied). Lift the loudspeaker on to the wall plate and
IMPORTANT NOTE: The rigging of a flown sound system may be dangerous unless undertaken by qualified personnel with the required experience and certification to perform the necessary tasks.
Spares and Accessories
Compression driver / diaphragm for
8” low frequency loudspeaker / recone kit for
15” low frequency loudspeaker / recone kit for B15/DP, B215/DP 18” low frequency loudspeaker / recone kit for B18/DP
NuQ series
Turbosound Ltd, Star Road, West Sussex RH13 8RY, UK
tel: +44(0)1403 711447 fax: +44(0)1403 710155 www.turbosound.com April 2011
NuQ Quickstart Guide v1.2 - Page - 4