Xante 100-100621 manual Connecting the Power Cable, Media Types

Getting Started (continued)

3.Plug the other connector (either a 25-pin or a 9-pin female connector) into the computer’s serial port.

Ethernet Connection (PC and Mac)

10BaseT or 10/100BaseT Unshielded Twisted Pair (UTP)

RJ-45

Fig. 23 Connect to Ethernet port.

1.Turn off your computer.

2.Connect one end of the CAT 5 Ethernet cable to your printer’s Ethernet port.

3.Connect the cable’s other end to the appropriate port on your network.

Connecting the Power Cable

Warning! Be sure to plug the printer into a properly grounded AC outlet. Do not use and extension cord. Use a surge protected outlet to help prevent power source fluctuations from damaging your printer.

Power Outlet

Power Cord

Power Source

Fig. 24 Connect power cord to printer.

Power Switch

Fig. 25 Press the power switch on.

Fig. 26 Start-up page prints (if enabled).

Media Types

Your XANTÉ printer supports plain paper, transparencies, laser-quality labels, thick paper stock, and envelopes; up to

16 to 24 lb. bond plain paper (60 - 90 g/ m2); thick stock: 60 lb. cover or 90 lb. index (163 g/m2).

9