Z Microsystems 18 manual Troubleshooting, No Image on Display

Page 17

Troubleshooting

NO IMAGE ON DISPLAY	What is the color of the Standby LED?
	Black -- No power or in Standby
	mode:
	• Make sure the power cable is
		plugged in.
	• Connect the power cable to a
		110 V outlet, which is turned
		ON.
	•	Wake up the display by pressing
		the Standby button.
	Orange -- There is power, but no video
	signal:
	•	Make sure the video cable is
		plugged into the VGA Video
		connector.
	•	Make sure there is video signal
		coming out of the computer.
	Green -- There is power and there is
	video signal:
	•	Make sure the video signal
		coming out from the computer
		is not a black image.
	•	Possible hardware failure.
		Contact Z Microsystems
		Customer Support.

17

Doc# 27-0004UM Issued 10/00 Rev 1.2 04/02/02

Image 17

Contents I O N FCC Information RegulatoryContents System Requirements Shipment ContentsStarting Point Product Description Tools Required PrecautionsDrawing Install OrionRear Panel Connectors Remove Protective Lens Connecting Cables Controls MonitorMonitor ON-SCREEN Menu Accessing the Menu SystemGraphics Mode Menu AdjustmentMain Screen Color BalanceConfiguration Video Setting PIP OptionVideo PIP PIP Option InformationMaintenance of Flat Panel Display MaintenanceNo Image on Display TroubleshootingNo Image on PIP Window PIP Option Power SpecificationsSize Picture in PictureORION18 ZS/VP ORION18 ZI/VP Reliability Specifications Mtbf WeightCabling Total Packaging SizeYear Standard Warranty WarrantyWarranty Warranty Further Help SupportProviding Feedback Replacing PartsDoc# 27-0004UM Issued 10/00 Rev 1.2 04/02/02 Microsystems