X’s-Drive II+ VP2160
zIf the message [ COPY OK ] pop on the screen , it indicates the files are successfully copied And the HDD free memory will be displayed.
yAll files transfered from each memory card are stored onto the Hard Disk in folders numerically, under the name " CF0001 " , " MS0001" , "SM0001" , "SD0001".
yWhen the same card was inserted and copied twice, two different folders were created, VP2160 won't overwrite the folder.
yTo stop the data transfer , just depress the Copy button and , the message [ COPY STOP]
will pop on the screen , then you can switch off the device .
8. Auto Power off Function
_________________________________________________________________
1)There is an auto screen- off function to save battery power .Thus if it is idle for 80 seconds ,It will shut off .
9.Battery Recharge:
_________________________________________________________________
1) To charge the batteries, please connect the plug of the AC adapter to DC 5V jack of
the main unit. When the Power LED indicator goes off, it indicates that the batteries are fully charged.
2)Please use only the FUJIFILM
3)For additional battery packs, please contact your dealer or you can purchase it
12