Parameter Setting Example:
To set the green offset value of the display output to 42:
1.From normal operation, press MENU.
The OSD main menu appears on the screen.
2.Press the + or – button to highlight COLOR. COLOR changes to green.
3.Press ENTER.
The Display submenu is displayed.
4.Press the + or – button to highlight G OFFSET. G OFFSET changes to green.
5.Press ENTER.
The G OFFSET parameter changes to red.
6.Press the + button to increase the value to 42.
7.Press ENTER to set the value.
G OFFSET is highlighted in green.
8.To exit normal operation, press MENU.
5.2.1The Main Menu
The following table defines the Main menu parameters and functions.
|
| Parameter |
|
|
| Function |
| ||||
|
|
|
|
|
|
|
|
|
| ||
| DISPLAY |
|
| Sets the output resolution, size and aspect ratio (see Section 5.2.2) | |||||||
|
|
|
|
|
|
| |||||
| COLOR |
|
| Sets the output color parameters (see Section 5.2.3) |
| ||||||
|
|
|
|
|
|
| |||||
| SDI AUDIO |
|
| Selects which embedded audio to output: Group 1, Group 2, Group 3, | |||||||
|
|
|
|
| Group 4, Auto, Off (audio is not outputted) Default: Auto |
| |||||
|
|
|
|
| When set to Auto, the unit searches for the lowest Group number |
| |||||
|
|
|
|
| which has audio and selects this audio Group |
| |||||
|
|
|
|
|
| ||||||
| FACTORY RESET |
|
| Resets all parameters to factory defaults |
| ||||||
| INFORMATION |
|
| Displays current input resolution, output resolution and firmware |
| ||||||
|
|
|
|
| revision |
| |||||
|
|
|
|
| |||||||
| AUTO SYNC OFF |
|
| When on, this | |||||||
|
|
|
|
| present |
| |||||
|
|
|
|
| When set to Auto, the unit searches for the lowest Group number which |
| |||||
|
|
|
|
| has audio and selects this audio Group |
| |||||
|
|
|
|
|
| ||||||
| EXIT |
|
| Exits the Main menu |
| ||||||
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
| 9 | ||||||||||
|
|
|
|
|
|
|
|
|
|
|
|