Kramer Electronics user manual Connecting the VP-471

4 Connecting the VP-471

i	Always switch off the power to each device before connecting it to your
	VP-471. After connecting your VP-471, connect its power and then
	switch on the power to each device.

To connect the VP-471as illustrated in the example in Figure 2:

1.Connect the digital SDI camera to the SDI IN BNC connector.

2.Connect the SDI LOOP BNC connector to an SDI display.

3.Connect the S/PDIF AUDIO OUT RCA connector to the digital AV receiver.

4.Connect the LEFT and RIGHT AUDIO OUT RCA connectors to the unbalanced stereo audio amplifier.

5.Connect the DVI OUT connector to the DVI projector.

6.Connect the 5V DC power adapter to 5V DC power socket and to the mains electricity (not shown in the illustration).

6 VP-471 - Connecting the VP-471