a/d/s/ HT10ps, HT12ps, C12ps, C10ps owner manual Maintenance, Voltage conversion, Case of difficulty

Page 12

AC power connection: Power cable connection.

maintenance

Normal maintenance of the subwoofer consists of keeping the unit clean and dust-free. Use a soft cloth or brush to remove dust without scratching or marring the finish. Do not use strong cleaner or solvents of any kind. Avoid spray cleaners or waxes. They can produce spotty glossy areas.

Keep moisture away from the subwoofer. Avoid the temptation to place a plant that needs watering on top of the subwoofer. If any part of the subwoofer gets wet, IMMEDIATELY unplug the power cord from the wall. Then clean up the moisture. If you suspect moisture has gotten inside the subwoofer or its amplifier, contact your authorized a/d/s/ dealer for service support.

voltage conversion

The subwoofer amplifier can be set to operate at 115 or 230 volts by using the voltage switch on the control panel of the amplifier.

in case of difficulty

Loose connections, defective connecting cables or improper operation causes most difficulties with high fidelity equipment. Often, problems show up after a change is made to the system or after the system has been moved. Carefully check all connections. Before you disconnect any equipment label all connecting cables and wires so you can reconnect them properly.

Some common difficulties and suggested remedies are described below. If these steps do not correct the problem, contact your a/d/s/ dealer for assistance. If you want to contact the factory, write or call the a/d/s/ Technical Service Department at:

Directed Electronics Inc.

1 Viper Way Vista, CA 92081

800-753-0800 ext. 2032

Technical Service is open from 6:30am to 5:30pm PST.

12

Image 12
Contents C10ps C12ps HT10ps HT12ps Page Table of contents IntroductionPage About the a/d/s/ subwoofers UnpackingPlacement System connection Power connection and power switch operation Controls and connections Input/Output Control Panel and Connection Detail back panelPage Page Maintenance Voltage conversionCase of difficulty Page Typical wiring diagrams Page Page Page Specifications Common specificationsWarranty information

C10ps, C12ps, HT12ps, HT10ps specifications

The modern automotive landscape is increasingly being shaped by advanced driver systems (a/d/s), which enhance both safety and the driving experience. Central to this revolution are cutting-edge systems like HT12ps, C10ps, HT10ps, and C12ps, each representing a leap in technology and features tailored for diverse vehicular needs.

HT12ps is known for its exceptional handling of real-time data processing. With a robust architecture, it offers seamless integration with various vehicle sensors. This system is particularly noted for its adaptive cruise control, which uses radar and camera inputs to maintain safe distances from other vehicles, greatly reducing driver fatigue during long journeys. Its predictive analytics capabilities help in anticipating road conditions, ensuring a more relaxed driving experience.

On the other hand, C10ps highlights connectivity and communication. This system incorporates vehicle-to-everything (V2X) technology, allowing vehicles to communicate with each other and the surrounding infrastructure. This collaborative approach enhances traffic management and reduces the likelihood of collisions. Its intuitive interface provides drivers with real-time alerts about road hazards and traffic conditions, ensuring a safer driving environment.

HT10ps stands out with its focus on automation. Designed for a range of vehicles, from personal cars to commercial fleets, this system employs advanced machine learning algorithms to adapt and optimize driving styles based on individual driver behaviors. It supports features like lane-keeping assistance and automated parking, which significantly ease the mounting challenges of urban driving.

Lastly, C12ps integrates high-definition mapping and localization technologies. This system uses detailed maps, coupled with inertial sensor data, to deliver accurate positioning, even in urban canyons where GPS signals may falter. Its emphasis on real-time updates allows for enhanced route planning and navigation, greatly improving overall efficiency for drivers.

Together, these a/d/s systems represent a significant advancement in automotive technology. By integrating varied features—ranging from automated driving assistance to powerful connectivity and real-time data processing—they contribute to a safer, more efficient, and enjoyable driving experience. As these systems evolve, they hold the promise of transforming the future of mobility, paving the way towards fully autonomous vehicles and smarter transportation networks.