Lenovo S6000L manual Important information about replacing RoHS compliant FRUs, Original part

Page 22

Lenovo IdeaTab S6000L Hardware Maintenance Manual

Important information about replacing RoHS compliant FRUs

RoHS, The Restriction of Hazardous Substances in Electrical and Electronic Equipment Directive (2002/95/EC) is a European Union legal requirement affecting the global electronics industry. RoHS requirements must be implemented on Lenovo products placed on the market after June 2006. Products on the market before June 2006 are not required to have RoHS compliant parts. If the original FRU parts are non-compliant, replacement parts can also be non-compliant. In all cases if the original FRU parts are RoHS compliant, the replacement part must also be RoHS compliant.

Note: RoHS and non-RoHS FRU part numbers with the same fit and function are identified with unique FRU part numbers.

Lenovo plans to transit to RoHS compliance well before the implementation date and expects its suppliers to be ready to support Lenovo’s requirements and schedule in the EU. Products sold in 2005 and 2006 will contain some RoHS compliant FRUs. The following statement pertains to these products and any product Lenovo produces containing RoHS compliant FRUs.

RoHS compliant FRUs have unique FRU part numbers. Before or after the RoHS implementation date, failed RoHS compliant parts must always be replaced with RoHS compliant ones, so only the FRUs identified as compliant in the system HMM or direct substitutions for those FRUs may be used.

Products marketed before June 2006 Products marketed after June 2006

Current or

Replacement

Current or

Replacement

original part

FRU

original part

FRU

 

 

 

 

Non-RoHS

Can be Non-RoHS

Non-RoHS

Can be RoHS

 

 

Non-RoHS

Can sub to RoHS

RoHS

Must be RoHS

Must be RoHS

Must be RoHS

Note: A direct substitution is a part with a different FRU part number that is automatically shipped by the distribution center at the time of the order.

18

Image 22
Contents IdeaTab S6000L Page Contents About this manual Lenovo IdeaTab S6000LSafety information General safety Electrical safety Lenovo IdeaTab S6000L Hardware Maintenance Manual Safety inspection guide Grounding requirements Safety notices multilingual translations Safety noticeLenovo IdeaTab S6000L Hardware Maintenance Manual Safety information Lenovo IdeaTab S6000L Hardware Maintenance Manual Safety information Lenovo IdeaTab S6000L Hardware Maintenance Manual Safety information Laser compliance statement Safety information Before replacing parts Important service informationStrategy for replacing FRUs Important service information Important notice for replacing a system boardImportant information about replacing RoHS compliant FRUs Original partGeneral checkout Following are not covered under warranty What to do firstApproximate information about the battery status Power system checkoutChecking the internal battery status Accurate information about the battery statusLenovo IdeaTab S6000L Hardware Maintenance Manual Security Related service informationPower management Activating/Deactivating the DisplayFeature Description SpecificationsLenovo IdeaTab S6000L Plastic to plastic FRU replacement noticesScrew notices Logic card to plasticRemoving and replacing an FRU Back cover Step Screw quantity Color TorqueLenovo IdeaTab S6000L Hardware Maintenance Manual Battery pack Removal steps of battery packSIM card and SD card Removal steps of SIM card and SD cardSystem board Important notices for handling the system boardRemoval steps of system board G g g g Back camera Sub board Removal steps of sub boardLocations Front viewRight-side view Back view Parts list Overall Lenovo IdeaTab S6000L Parts list-Overall USB Cable AC adaptersScrew Power cords Parts list-3-pin power cordsLenovo IdeaTab S6000L Lenovo IdeaTab S6000L Hardware Maintenance Manual Page Trademarks