WIZZ.IT 3 OPERATION
After Wizz.it 3 is installed, the Wizz.it 3 icon is displayed on the PC desktop.
To make settings for the remote controller after startup, either edit the default configuration file or use a new configuration file.
ICON DESCRIPTIONS
q w e r t y u i o !0 !1 !2 !3 !4 !5 !6 !7 !8
qNew Configuration
This creates a new setting configuration.
wOpen Configuration
This opens a setting file saved in the PC.
eSave Configuration
This saves the configuration that is being edited as a user file to the PC.
rDownload to remote control
This writes the edited configuration to the remote controller.
tUpload from remote control
This loads remote controller settings to the PC.
yUndo
This is used to undo an edit operation in the settings.
uRedo
This is used to redo an edit operation in the settings that were undone.
iCut
This cuts a selected setting.
oCopy
This copies a selected setting.
!0 Paste
This pastes a selected setting.
!1 Delete
This deletes a selected setting.
!2 Label
This is used to set the label of a selected device or button.
!3 Properties
This is used to set the properties of a selected device or button.
!4 Add new device
This adds a new device.
!5 Add new page
This adds a new page.
!6 Wizz. it Simulator
This simulates on the PC the remote controller that was set.
!7 Clock Sync
This synchronizes the internal clock of the remote controller with the internal clock of the PC.
!8 Help
The User Manual is displayed as a PDF file.
3