ADD IR CODE WINDOW
y
q | t | w | e | r |
qLearn IR
This is used to learn the remote control codes from other remote controllers and set them in the action list. (Refer to page 7, “Learning IR”.)
wMy Database
This loads and sets the IR codes registered in My Database. Specify the file saved in the PC to load the IR codes registered in My Database.
eIR Database
This loads and sets the IR codes from the IR Database containing the remote codes from various brands. (Refer to page 8, “IR Database Window”.)
rRC5/6
This uses direct key input to set the remote control codes
tTest IR
This performs a test transmission of IR commands by sending a preset code from the remote controller connected to the PC.
yDuration
This is used to adjust the duration of the IR command.
6