Lenovo K3011W manual General checkout

Page 23

General checkout

General checkout

This chapter presents the following information:

•• “What to do first” on page 20

•• “Power system checkout” on page 21

Before you go to the checkout, make sure to read the following important notes:

Important notes:

Only certified trained personnel can service the computer.

Before replacing any FRU, read the entire page on removing and replacing FRUs.

When you replace FRUs, use new nylon-coated screws.

Be extremely careful during such write operations as copying, saving, or formatting. Drives in the computer that you are servicing sequence might have been altered. If you select an incorrect drive, data or programs might be overwritten.

Replace an FRU only with another FRU of the correct model. When you replace an FRU, make sure that the machine model and the FRU part number are correct by referring to the FRU parts list.

An FRU should not be replaced just because of a single, unreproducible failure. Single failures can occur for a variety of reasons that have nothing to do with a hardware defect, such as cosmic radiation, electrostatic discharge, or software errors. Consider replacing an FRU only when a problem recurs. If you suspect that an FRU is defective, clear the error logs and run the test again. If the error does not recur, do not replace the FRU.

Be careful not to replace a nondefective FRU.

19

Image 23
Contents Lenovo IdeaTab K3011W First Edition Oct Copyright Lenovo 2012. All rights reserved Contents About this manual Safety information General safety Electrical safety IdeaTab K3011W Hardware Maintenance Manual Safety inspection guide Grounding requirements Safety notice Safety notices multilingual translationsIdeaTab K3011W Hardware Maintenance Manual Safety information IdeaTab K3011W Hardware Maintenance Manual Safety information IdeaTab K3011W Hardware Maintenance Manual Safety information Laser compliance statement Safety information Strategy for replacing FRUs Important service informationImportant notice for replacing a system board Important service informationImportant information about replacing RoHS compliant FRUs General checkout What to do first Following are not covered under warrantyChecking operational charging Power system checkoutChecking the AC adapter IdeaTab K3011W Hardware Maintenance Manual Restoring the factory contents by using OneKey Recovery Related service informationSupervisor password PasswordsPower-on password Sleep standby mode Power managementScreen blank mode Lenovo IdeaTab K3011W SpecificationsLenovo IdeaTab K3011W Status indicators Status indicatorsHotkeys Function key combinationsScrew notices FRU replacement noticesRemoving and replacing an FRU Disassemble the keyboard in the direction shown by arrows KeyboardRemoval steps of keyboard bezel Keyboard bezelRemove the keyboard bezel in the direction shown by arrow Lenovo IdeaTab K3011W Removal steps of dock battery pack Dock battery packLenovo IdeaTab K3011W Removal steps of dock cradle board Dock cradle boardRemoval steps of hinge module Hinge moduleRemoval steps of tablet base cover Tablet base coverRemove the base cover in the direction shown by arrow IdeaTab K3011W Hardware Maintenance Manual Integrated camera Detach the FPC connector in the direction shown by arrows 1Removal steps of tablet USB board and button board Tablet USB board and button boardLenovo IdeaTab K3011W Important notices for handling the system board System boardRemove two screws 5 and eight screws Removal steps of speakers SpeakersRemoval steps of micro Hdmi board Micro Hdmi boardAntenna assembly Removal steps of tablet battery pack Tablet battery packTablet LocationsDock Parts list Overall Tablet Parts list-Overall AC adapters Parts list-3-pin AC adaptersPage Trademarks