SIIG 04-0600B manual Self-Tapped Mounting

Page 7

	Back	1/4"-20 x 1/2"
	Speaker
		Machine Screw

4-Hole Orientation

2-Hole Orientation

Figure 5

Self-Tapped Mounting

1.Locate the optimum location for the mounting plate and use it as template to mark the drilling locations. Do not drill or screw into the speaker where you could possibly damage the internal components.

2.Drill the pilot hole(s) using a 1/8" drill bit. The holes(s) should not be drilled more than 1/2" depth, see Figure 6 on the next page.

Image 7

Contents Serial Number Sticker Key Features and BenefitsMounting Hardware Package ContentsSingle Hole Mounting InstallationM4 x 8mm Flat Head Machine Screw Back Speaker Key Hole Mounting Hole Mounting Self-Tapped Mounting Wood Surface Mounting to the Wall or CeilingDrywall Surfaces Concrete Surface Extension Mounting Speaker Mounting Low-Profile MountingBlank Blank Technical Support and Warranty About SIIG, Inc