Panasonic TH-37PH9UK, TH 42PS9UK, TH 42PH9UK operating instructions Options Adjustments

Options Adjustments

Options		1/3
Off-timer function	Enable
Onscreen display	On
Initial INPUT	Off
Initial VOL level	Off	0
Maximum VOL level	Off	0
INPUT lock	Off
Studio W/B	Off
Advanced PIP	Off
Display size	Off

Item Effect Adjustments

Press button to adjust the volume when TV is turned on.

		Off	On
Initial VOL		Off:	Sets normal volume.
		On:	Sets your preferred volume.
level	Off On
		Notes:

•When “Maximum VOL level” is “On”, the volume can only be adjusted between 0 and your maximum range.

•You can hear the changed volume regardless of your volume setting before opening the options menu if you adjust the volume when “Initial VOL level” is “On” and cursor is on the menu.

Press button to adjust the maximum volume.

			Off		On
			Off:		Sets auto maximum volume.
Maximum VOL			On:		Sets your preferred maximum volume.
			Notes:
level	Off	On
			• If the “Maximum VOL level” is set lower than the “Initial VOL level”, the “Initial VOL level” automatically
			becomes the same as the “Maximum VOL level”.
			• The volume display can go up to 63 regardless of the settings.
			• You can hear the changed volume regardless of your volume setting before opening the options menu if you
			adjust the volume when “Maximum VOL level” is “On” and cursor is on the menu.
			Off		PC	INPUT1	INPUT2	INPUT3
			Locks the input switch operation.
			Notes:
INPUT lock			• Only the adjusted signal is displayed (see page 18).
			• Signal can be displayed when the Terminal board is installed.
			• Input switch can be used when this is set to “Off”.
			• In two screen display mode, if anything other than “Off” is set, the value will be fixed as the value input
			in the single screen display mode.
Studio W/B			Off:		Nullify all the settings adjusted.
	Off	On	On:		Sets the color temperature for TV studio.
			Note: Valid only when the low is set as color temperature on screen adjustment.
			Off:		Sets normal two screen display mode (see page 21).
			On:		Sets Advanced PIP mode (see page 22).
Advanced PIP	Off	On	Notes:
			• When “INPUT lock” is “On”, you cannot use all the two screen display functions.
			•	,	buttons are unavailable during Advanced PIP mode operation.
			Adjusts the image display size on screen.
			Off:		Sets the normal image display size on screen.
			On:		Sets the image display size approximately 95 % of the normal image display.
					Off			On
Display size
	Off	On	Notes:

•This setting is valid only when the input signals are as follows; 525i, 525p, 625i, 625p, 750/60p, 750/50p, 1125/60i, 1125/50i, 1125/24sF, 1125/25p, 1125/24p, 1125/30p, 1250/50i (Component Video, RGB, DVI, SDI, HDMI)

•This setting is invalid when two screen display, digital zoom or Multi screen is selected.

•When Display size is set to “On”, Pos. /Size adjustment cannot be used.

•Refer to each board's operating instruction for DVI, SDI, HDMI's corresponding signals.

42