Panasonic VL-DM200BX For your safety, Power connection, Installation, Operating safeguards

Page 5

Important Information

For your safety

To prevent severe injury and loss of life/property, read this section carefully before using the product to ensure proper and safe operation of your product.

WARNING

Power connection

R Use only the power source marked on the unit. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.

R Use only the specified AC adaptor.

R Do not overload power outlets and extension cords. This can result in the risk of fire or electric shock. R Completely insert the AC adaptor into the power outlet. Failure to do so may cause electric shock and/

or excessive heat resulting in a fire.

R Regularly remove any dust, etc. from the AC adaptor by pulling it from the power outlet, then wiping with a dry cloth. Accumulated dust may cause an insulation defect from moisture, etc. resulting in a fire.

R If the unit emits smoke or an abnormal smell, or makes an unusual noise, immediately unplug the AC adaptor from the power outlet and remove the battery pack. These conditions can cause fire or electric shock. Confirm that smoke has stopped and contact an authorized service center.

R Never touch the plug with wet hands. Danger of electric shock exists.

Installation

R Do not use the unit in areas that are exposed to rain, moisture, steam, or oily smoke, or areas that have excessive dust. This may cause fire or electric shock.

R Do not install or use this product near automatically controlled devices such as automatic doors and fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident.

R Do not perform any actions (such as damaging, altering, exposing to heat sources, or placing heavy objects on the AC adaptor) that may damage the AC adaptor. Using the unit with a damaged AC adaptor may cause electric shock, short circuits, or fire. Contact an authorized service center for repairs.

Operating safeguards

R To reduce the risk of electric shock, do not disassemble this unit. Refer servicing to an authorized service center when service is required. Opening covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the unit is subsequently used.

R Do not touch the Charger or the AC adaptor during an electrical storm. There may be a remote risk of electric shock from lightning.

R Never put metal objects inside the unit. This may cause fire or electric shock. If metal objects enter the unit, immediately unplug the AC adaptor from the power outlet and refer servicing to an authorized service center.

R Never spill any liquids on the unit or get the unit wet in any way. This may cause fire, electric shock, or injury. If the unit becomes wet, immediately unplug the AC adaptor from the power outlet and refer servicing to an authorized service center.

R Never spill any liquids on the AC adaptor, or get the AC adaptor wet in any way. This may cause fire, electric shock, or injury. If the AC adaptor becomes wet, immediately unplug the AC adaptor from the power outlet and refer servicing to an authorized service center.

R Unplug this unit from power outlets and refer servicing to an authorized service center when the following conditions occur:

If the AC adaptor is damaged or frayed.

If metal objects have been dropped inside the Charger.

5

Image 5 Contents
Operating Instructions Table of Contents Product information Accessory informationTrademarks LicensePower connection For your safetyInstallation Operating safeguardsMedical Battery packInstallation and relocation Before using Important safety instructionsFor best performance EnvironmentRequesting repairs for the unit Other informationOthers Charging the Wireless Monitor To pair canceled Wireless Monitors Pairing to the Base UnitCanceling the Wireless Monitor Specifications Weight Approx g Operating temperature Page Page Attach your sales receipt here For your future reference