Panasonic KX-PW11CLK Using a Caller ID Display Service, How the number is displayed, Setting up

Using a Caller ID Display Service

This unit can work with NTT’s number display service. A contract with NTT (charge fee) and setting this unit are required.

Application for NTT contract

Set this unit to “アリ ” (ON).

After 2-3 days (normally)

The line is constructed by NTT, and the service begins.

1 How the number is displayed

When you do not want to display your telephone number to the other party when calling, there are two methods available.

First choose the method and then you must apply to NTT.

Per-call Blocking

If you enter 184 before the number you call, your number will not be displayed.

Per-line Blocking

Your number will not be displayed for any call you make. However, you can display your number if you enter 186 before the number you call.

2 Setting up

Subscribe to NTT, and then set the display to “アリ ” (ON).

		登録	選択	機能
1	2	3
4	5	6
7	8	9		ストップ
	0

1. Press		機能 (function).
2. Press		1 3 3 .
3. Press		選択 (select) to select “アリ ” (ON).
					ON
	N O . テ ﾞ ィ ス フ ° レ イ = ア リ
			Changes each time you
			press 機能	(function).
	N O . テ ﾞ ィ ス フ ° レ イ = ナ シ				OFF
4. Press		登録 (register).
5. Press		ストップ
			(stop).

Note:

●If you do not set the unit to “アリ ” (ON), the first bell will ring shorter than usual, even if you receive the Caller ID Display service.

●When you cancel the Caller ID Display service, select “ナシ ” (OFF) in step 3.

11