Panasonic KX-PW11CLK manual Preparations, Installing the recording paper and stacker, Connections

Preparations

1 Installing the recording paper and stacker

Thermal paper

IncorrectSlack

Push up to open the cover.

2 Connections

Stacker

		For B4 size
		recording paper
			Raise the antenna.
Close the cover.	Approx.	To Power	Connect to “回線 ” (line).
	15 cm	Outlet
		click	To Telephone Line

3 Automatic dial mode setting

When the power cord and the telephone line cord are connected, the unit will start detecting the dial mode (tone

or pulse). If you cannot dial and “ｶ ｲ ｾ ﾝ			ﾁ ｪ ｯ ｸ	ｴ ﾗ ｰ U 6 1 ” is displayed, change the dial mode setting.
登録	選択	機能

1 2 3

4 5 6

7 8 9 ストップ

0

Changing the dial mode

Confirming the dial mode

1.Set the dial mode to “20”.

(See “Changing the dial mode” shown on the left.)

2. Dial 1 1 7 (time signal).

If you cannot dial, change to “10”.

If you cannot dial after changing to “10”, set to “ﾌ ﾟ ｯ ｼ ｭ ” (tone).

Note:

1.Press 機能 (function).

2.Press 0 7 9 .

3.Press 選択 (select) to select the dial mode (ｶ ｲ ｾ ﾝ ｼ ｭ ﾍ ﾞ ﾂ ).

4.Press 登録 (register).

ストップ

5. Press (stop).

ｶ ｲ ｾ ﾝ ｼ ｭ ﾍ ﾞ ﾂ = ﾌ ﾟ ｯ ｼ ｭ

ｶ ｲ ｾ ﾝ ｼ ｭ ﾍ ﾞ ﾂ = 2 0

ｶ ｲ ｾ ﾝ ｼ ｭ ﾍ ﾞ ﾂ = 1 0

ｶ ｲ ｾ ﾝ ｼ ｭ ﾍ ﾞ ﾂ = ｼ ﾞ ﾄ ﾞ ｳ

Tone

Pulse 20pps

Pulse 10pps

Auto

If this unit is connected to a PBX or used as an extension, dial the access code (ex. 0 ) before the time signal.

2