Model No. KX-P7110

Laser Printer Network Setup Guide

KX-P7110 comes standard with an Ethernet network device. First read the Setup Guide for basic setup procedures and necessary precautions for safety and use. Then perform the network setup following this guide when the printer is connected to the network.

For the detailed information, see the “Network” section in the Operating Instructions.

Keep this documentation in a safe place for future reference.

Setup for Network Print

(For Windows). . . . . . . . . . . . . . . . . . . . 1

LPR Port Printing in Windows 95 /

Windows 98 / Windows Me . . . . . . . . . . . . . . 1 LPR Port Printing in

Windows NT 4.0 / Windows 2000 . . . . . . . . . 3 Installing the Web Administrative Tool . . . . . . . 4

Setup for Network Print (For Mac). . . . . 4

Setup for Network Print (For Windows®* 1)

LPR port printing with TCP/IP is only explained in this guide. For other settings and detailed information, see “Network” section in the Operating Instructions. (See below.)

■Reading the Operating Instructions

The Operating Instructions are installed in your computer after installing the printer driver. Before installing the printer driver, you can also read the Operating Instructions on the printer CD-ROM as follows:

(1)Insert the printer CD-ROM into your computer CD- ROM drive.

(2)Double click the Network.pdf in the Manual folder on the printer CD-ROM.

•To open and read the Operating Instructions on your screen, Acrobat Reader program must be installed in the computer. To install it, double click the Ar405eng.exe*2.

*1Microsoft® Windows® operating system (hereafter Windows)

*2File name of Acrobat Reader may differ depending on the version.

•Microsoft, Windows and Windows NT are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.

•AppleTalk, LaserWriter, Mac and Macintosh are trademarks of Apple Computer, Inc.

•Adobe, the Adobe logo, Acrobat, and the Acrobat logo are trademarks of Adobe Systems Incorporated.

•All other acknowledgments are trademarks or registered trademarks of their respective holders.

The instructions are subject to change without notice. © Kyushu Matsushita Electric Co., Ltd. 2001

LPR Port Printing in Windows 95*1 /Windows 98*2 / Windows Me*3

■Step 1: Setting up TCP/IP on the Computer

If the TCP/IP of your computer is already set, proceed to the next step. If it is not set, consult with your network administrator. Regarding the conﬁguration of TCP/IP, refer to the help menu or documentation for Windows.

■Step 2: Setting up TCP/IP of the Printer

You may need to contact your network administrator to set up the TCP/IP.

1 Press PRINT/RESET button on the printer

panel less than 5 seconds to print the conﬁguration page.

2 Conﬁrm the MAC address on the conﬁguration page.

3 Insert the printer CD-ROM into the CD-ROM

drive.

The CD-ROM launches automatically.

Note:

• If the CD-ROM does not launch automatically, perform the following procedures

(1)Double click My computer icon. (2)Double click the CD-ROM icon.

*1Microsoft® Windows® 95 operating system (hereafter Windows 95)

*2Microsoft® Windows® 98 operating system (hereafter Windows 98)

*3Microsoft® Windows® Millennium Edition operating system (hereafter Windows Me)

Panasonic setup guide Model No. KX-P7110, Setup for Network Print For Mac