Panasonic KX-P7110 Steps 1, Installing the LPR Port on the Computer Windows NT 4.0 only

Click Install Printer driver and Utilities.

Click Install Printer driver and Utilities.

■Step 4: Installing the Printer Driver and Selecting the Printer Port

If the printer driver is already installed, refer to the “Network” section in the Operating Instructions.

1 Insert the printer CD-ROM into the CD-ROM drive and click KX-P7110.

2

3 Follow the instructions until the screen below is displayed.

4 Click on the check box of the installed options in

your printer. Click Next .

5 Click the LPR port (ex. KX-P7110 No.1) you created on the previous step from the Select

	the current port list, then click Next .
6	Click Finish .

Note:

•Change the spool setting to disable bi-directional support in the printer driver as follows:

(1)Display the printers folder (Start-Settings- Printers).

(2)Click the printer using the right mouse button and select Properties.

(3)Click the Details tab and click Spool Settings….

(4)Click on the Disable bi-directional support for this printer check box.

LPR Port Printing in Windows NT® 4.0*1 / Windows 2000*2

■Steps 1 and 2

Perform steps 1 and 2 of “LPR Port Printing in Windows 95 /Windows 98 / Windows Me” on page 1. For Windows 2000, skip the next step 3.

*1Microsoft® Windows NT® operating system Version 4.0 (hereafter Windows NT 4.0)

*2Microsoft® Windows® 2000 operating system (hereafter Windows 2000)

■Step 3: Installing the LPR Port on the Computer (Windows NT 4.0 only)

You must login to the server computer as a supervisor to perform the following steps.

1

Click

Start

, select Settings, then click

Control Panel.

2

Double click the Network icon.

3

Click the Services tab.

4

If there is Microsoft TCP/IP Printing in the

Network Service list, click

OK

.

If not, click

Add...

and perform the following

5

steps.

Select Microsoft TCP/IP Printing from

Network Service list, then click

OK

.

6

Insert the Window NT 4.0 CD-ROM into the

CD-ROM drive, type the path name and then

click

Continue

. All necessary files are copied

to the

hard disk.

7

Click

Close

.

8

Click

Yes

to restart your computer.

■Step 4: Setting up the Printer Driver and the Printer Port on the Computer

If the printer driver is already installed, see the “Network” section in the Operating Instructions.

You must login to the server computer as a supervisor to perform the following steps.

1 Insert the printer CD-ROM into the CD-ROM drive and click KX-P7110.

2

3 Follow the instructions until the screen below is displayed.

4 Click on the check box of the installed options in

your printer. Click Next .

Windows

3