SV Sound PB10-ISD manual Setup, calibrating and integration

Page 6

Page 6 Page 6

SV Subwoofers

Setup, calibrating and integration

What’s to know? Well, first of all, setting up an SV Subwoofer is pretty darn easy. There are a few key things to get right though if you want to get the most out of your sub…

Unpacking. You’re probably eager to fire up your sub, but take time to carefully unpack everything. Save the box and shipping materials, just in case you need to return the sub for any reason.

Location. They say it’s ALL about location right? It’s the same with setting up your subwoofer. So, where to put it? Go for a corner if you can, and avoid putting your sub where it might adjoin large open areas. Studies have shown that the deepest and flattest bass response is typically attained when a subwoofer is placed within a few feet of one of your home theater’s corners. A corner near your seat is best of all. The front-firing configuration of this SVS makes this easy. Whether you put the sub in front or to the rear of your seating area makes surprisingly little difference. Deep home theater bass, like that from “5.1 channel” DVDs is non-directional. You can’t tell where it is coming from, even though you can hear, and feel it.

Hook-up(see fig. 1). To configure your new sub, a simple mono, shielded 75 Ohm A/V RCA type cable (a.) is all you need to take the subwoofer output jack of your DD/DTS surround sound receiver (b.) and feed the low-level input of the sub’s amp.

SVS PB10-ISD “Input” jack

(a.)

Fig. 1

NOTE: Stop now if you aren’t

Totally familiar with your receiver’s manual. Ensure all power to your equipment is off

when making these connections. Also, be certain your power outlet can handle a minimum of 350 watts. (Use of “convenience outlets” on receivers are not recommended for powering your SVS.)

(b.)

DD/DTS Processor/Receiver (Subwoofer “Out” RCA jack)

Page 5 Page 7
Image 6
Page 5 Page 7
Contents I D E SV Subwoofers SV Subwoofers Welcome About your SV Subwoofer Setup, calibrating and integration More Setup, calibrating and integration Menu to check these critical choices PagePage9 SV Subwoofers Bassy demo scenes to die for More Bassy demo scenes Glossary of Home Theater Terms SV Subwoofers SV Subwoofers Terms and Conditions

PB10-ISD specifications

The SV Sound PB10-ISD is an innovative subwoofer designed for audiophiles and casual listeners alike, delivering powerful and immersive low-frequency sound. This subwoofer stands out for its combination of advanced technology, elegant design, and exceptional performance, making it an ideal addition to any home theater or music system.

One of the primary features of the PB10-ISD is its robust 10-inch driver. This driver is engineered to produce deep, rich bass while maintaining accuracy and clarity. The design incorporates a high-excursion cone, enabling it to push more air and generate impactful sound waves, resulting in an engaging listening experience. The driver is housed in a well-constructed ported enclosure optimized for low-frequency output, ensuring that the subwoofer can generate the deep bass tones that create a sense of realism in movies and music.

The PB10-ISD is powered by a high-efficiency amplifier, providing up to 300 watts of peak power. This amplifier is designed with low distortion and high headroom, allowing the subwoofer to perform effectively even at high volumes. The combination of the powerful driver and the capable amplifier gives the PB10-ISD the ability to fill large rooms with deep, engaging bass without compromising sound quality.

One of the standout technologies in the PB10-ISD is its Intelligent Signal Detection (ISD) feature. This technology allows the subwoofer to enter standby mode when it is not receiving an audio signal, conserving energy while maintaining readiness. The automatic power on/off function enhances convenience and ensures that the subwoofer is always operating efficiently.

Another notable characteristic of the PB10-ISD is its adjustable volume control and phase switch. These features empower users to fine-tune the bass response according to their preferences and the acoustics of their room. The ability to customize the sound output makes it easier for listeners to achieve optimal audio performance tailored to their specific setup.

The SV Sound PB10-ISD combines versatility with aesthetic appeal. It boasts a sleek design that can complement any home decor. Its compact size allows for flexible placement in various room configurations.

In summary, the SV Sound PB10-ISD subwoofer is a compelling option for those seeking a high-performance audio solution. With its powerful driver, efficient amplifier, and intelligent features, it delivers exceptional low-frequency sound, making it perfect for movie enthusiasts and music lovers alike.
Top Page Image Contents