Panasonic DP-7000 manual Loading Paper in Tray 5 Bypass, Move the Paper Guide to touch the paper

Page 45

Loading Paper

Loading Paper in Tray 5 (Bypass)

The Tray 5 (Bypass) has a capacity of 50 sheets. The paper size is as

Load special media, non-standard size paper, which cannot be loaded in Trays 1-4, Tray 6 (High Capacity Feeder) (optional), and Tray 5 (Bypass).

Procedure

follows.

*However, image which can be copied

on the Y axis is up to 11 inches.

Load perforated paper with the holes toward the back of the tray.

When copying on OHP film (8.5 x 11" or A4), please set the OHP film in Landscape orientation.

Open Tray 5 (Bypass) by holding the grip on the left side of the machine.

If necessary, pull out the

Extension Tray.

2

Do not place things other than media on Tray 5 (Bypass). Also, do not make copies while holding the edge of the paper. The wrong paper size may be detected leading to paper jams.

Make sure that the Paper Guide is set so that it touches the paper. Skewed paper will cause the copy image to be slanted.

When copies are made by placing the original on the document glass, there may be a loss of image due to error in size detection. As such, enter the size of the original with the Original Size feature, or use the DADF.

Do not move the Paper Guide after the Start button has been pressed and until copying has stopped.

Load paper with the side to be copied facing up and inserting them till they touch the back of the tray.

Make sure the edges of paper

towards you are aligned.

Move the Paper Guide to touch the paper.

Tray 5 (Bypass) under Paper

Supply of the Basic Features

screen becomes selectable.

2-3 Loading Paper 23

Image 45
Contents English DP-6000/7000TRADEMARKS/COPYRIGHTS Ozone Safety Safety NotesLaser Safety PrefaceEuropean Union FCCUseful Features Creating a Binding Margin Specifying the Size of a Document Enhancing Sharpness of a Photo Using These Operating Instructions Using the Auditron Feature TroubleshootingChapter Daily Care AppendixConventions Precautions for Installation and Relocation Safety NotesPower Requirements and Ground Connection Xii Operating Safeguards Consumable Safeguards Handling Instructions Locations of Warning and Caution LabelsAuto Power Off Feature Two-sided Copying FeatureSleep Mode Feature Low Power Mode FeatureTable of Contents Chapter Loading Documents Chapter Custom Presets Appendix Getting to Know Your Copier Main Components Main Components Their FunctionsGetting to Know Your Copier Control Panel Getting to Know Your Copier Breaker Switch Switching On and OffSwitching On the Power Turn the power switch to the positionSwitching Off the Power Switching Off the Power AutomaticallyAuto Start Feature Icon Using the Touch Panel DisplayChanging the Display Screen Selecting a Feature When a Button Is Not Available Error Message Screen Power Saver ScreenMessage Pop-up and Confirmation Pop-up Screens When the Auditron Feature is Enabled Entering PasswordProcedure For Models Which Come with the Printer Feature Saving PowerUsing the Power Saver Mode Entering Power Saver Mode AutomaticallyDisabling the Power Saver Mode Procedure Press Power Saver On/OffLoading Paper Weights of Paper What Paper to UsePaper Size and Tray Loading Capacity Types of media for the respective trays are as shown below Types of Special MediaHandling Curled Paper Storing and Handling PaperLoading Paper Loading Paper in Trays 1 toPull out the empty tray until it stops Push the tray in slowly until it stops Move the Paper Guide to touch the paper Loading Paper in Tray 5 BypassPull the tray out slowly until it stops Loading Paper in Tray 6 High Capacity Feeder optionalChanging the Paper Tray Size Changing the Size of TrayPull Tray 1 out until it stops 26 2-4 Changing the Paper Tray Size Pull out the tray that you want to change until it stops Changing the Size of Trays 2 to28 2-4 Changing the Paper Tray Size Press Settings/Meter Check on the control panel Select Tools ModeSelect Paper Tray Attributes Select Paper Sizes Select Exit Tools Pull Tray 6 High Capacity Feeder out slowly until it stops Changing the Size of Tray 6 High Capacity Feeder optional32 2-4 Changing the Paper Tray Size Loading Documents Loading Documents in the Dadf DocumentsPlacing Documents on the Document Glass Loading Documents Align the lead edges of your documentsMove the Document Guide to gently touch the document Open the document cover When copying aIndependent X-Y% is selected Screen Display When Using Document GlassBasic Features Output/Finishing Collate/Uncollate Stapling/Punching Overview of Basic FeaturesClear All InterruptKeypad StopLoad the document Selecting a Paper TrayReduce/Enlarge Reducing/EnlargingSize-for-Size Copying Reduce/Enlarge can also be selected on the Features MenuReduction or Enlargement Preset Percentage Change Select Variable % Variable Percentage Change Variable %For example, enter 120% Independent X-Y% Reducing/Enlarging the Length and WidthSpecifying X/Y Percentage Change Variable X-Y% Select Independent X-Y%Select Variable X-Y% Enter the X and Y ratios by using buttons Select Calculator % Specifying Original/Copy Size Calculator %Select Enter/Next Automatic X/Y Percentage Change Auto-Fit Automatic Image Rotation Copying on One Side On the Basic Features screen, select 2 SidedSided Select either 1 1 Sided or 2 1 SidedCopies are made on one side of the paper

DP-6000, DP-7000 specifications

The Panasonic DP-7000 and DP-6000 are high-performance multifunctional document imaging solutions designed to meet the demanding needs of modern offices. These devices stand out for their robust capabilities including printing, copying, scanning, and faxing, while also ensuring exceptional reliability and ease of use.

The DP-7000 leads the lineup with impressive speed and quality. It boasts a printing speed of up to 70 pages per minute, making it suitable for high-volume environments. The DP-6000, while slightly slower, still offers competitive speed and is an ideal choice for medium-sized businesses. Both models deliver a resolution of 1200 x 1200 dpi, ensuring crisp text and vivid images that enhance professional presentations and documents.

User experience is a focal point for both devices, featuring an intuitive touchscreen interface that simplifies operation. This color display provides easy access to frequently used functions, allowing users to seamlessly navigate through settings and options. The machines also support various paper sizes and media types, enhancing their versatility. Standard paper capacity is impressive, with the ability to expand with optional trays for increased output without constant reloads.

Another key feature is the advanced scanning capability. Both models include duplex scanning, which enables the simultaneous scanning of both sides of a document, significantly improving workflow efficiency. The scanning resolution can reach up to 600 x 600 dpi, ensuring high-quality digital copies of all documents.

Connectivity options are abundant with both the DP-7000 and DP-6000. They support USB, Ethernet, and Wi-Fi connections, alongside mobile printing technologies such as Apple AirPrint and Google Cloud Print. This flexibility allows users to print from various devices, whether at the office or on the go.

Security is also paramount in the design of these devices. They feature robust security protocols that safeguard sensitive information, making them suitable for industries where data protection is critical. Features like user authentication and secure printing help in managing access and protecting confidential documents.

In summary, the Panasonic DP-7000 and DP-6000 are reliable, high-speed multifunction printers ideal for businesses seeking efficient document management solutions. Their blend of advanced features, user-friendly design, and network connectivity establishes them as strong contenders in the competitive office equipment market. With these models, Panasonic continues to reinforce its reputation for quality and innovation in document imaging technology.