Installing the Software

A CD-ROM drive is necessary for the installation.

CAUTION

<CF-73 Series>

When using the internal modem, change the COM port with the following procedure before installation.

1Select [start] - [Control Panel] - [Performance and Maintenance] - [System] - [Hard- ware] - [Device Manager] - [Modems] - [Panasonic V.92 MDC Modem] - [Ad- vanced] - [Advanced Port Settings].

2Select [COM9] at [COM Port Number] and select [OK].

3Select [OK] and restart the computer.

1Turn on or restart the computer.

Press F2 while [Panasonic] screen is displayed soon after the computer begins the startup procedure.

If [Enter Password] is displayed, enter the Supervisor Password.

2 Select the [Advanced] menu and confirm the followings.

The serial port’s setting for [Wireless Modem] is optimal.

[On & Off] is selected at [Power SYNC with PC].

If [On & Off] is not set, confirm the power to the EDGE modem is on.

NOTE

<CF-29 Series>

For details on the COM ports assigned to wireless modem, refer to “Technical Information” in the Reference Manual.

3 Save the settings and exit the Setup Utility.

4 Log on to Windows with the administrator authority. 5 Insert the CheckNet CD-ROM into the drive.

6 At [Welcome to the Found New Hard- ware Wizard], select [No, not this time], and then select [Next].