Useful Information
*1 Approximate data transmission speed when transmitting data using the UDP protocol.
4.If you are not satisfied with the speed test result, connect the terminal to a different wall outlet and repeat the test.
Note
•The fastest and slowest speeds are displayed by the indicators alternatively for about 6 seconds. If there is little difference between the fastest and slowest speeds, they will be displayed as the same speed.
•At least one indicator (“Good” network speed) must be lit in order to use the terminal.
•If you are not satisfied with the speed test result and have tried connecting the terminal to different wall outlets, refer to the troubleshooting section (see page 23).
•If the electrical conditions in your home change, network speed may also change.
Once you are satisfied with the terminal’s speed test result, you are ready to connect each adaptor to a network device (broadband router, hub, computer, network printer, network camera, etc.; see page 16).
18