Panasonic BL-PA300KTA warranty Understanding the indicators, Plc

		Useful Information
Understanding the indicators
PLC	Green, lit	The adaptor is successfully connected to the
		HD-PLCnetwork.
	Green, flashing	The terminal is being registered to the master.
	Green, flashes	The adaptor is registered to the master, but it is
	once every 5	not connected to the HD-PLCnetwork.
	seconds
	Red, lit for 5	There was an error during registration. Try
	seconds	again.
	Red, lit	The adaptor is not functioning properly and
		cannot communicate over the HD-PLC
		network. Contact an authorized Panasonic
		service center.
	Off	The adaptor is not plugged in.
		The adaptor is not connected to the HD-PLC
		network (no other adaptors found, not
		configured, etc.).
LAN	Green, lit	A LAN cable is connected to the adaptor.
	Green, flashing	Data is being sent/received.
	Orange, lit	There is no network device connected to the
		adaptor via the LAN cable, or the network
		device is not turned on.
	Off	The adaptor is not plugged in.
		Power Save is active. (See page 15)
MASTER	Green, lit	The adaptor is configured as the master.
	Green, flashes	A terminal has been successfully registered to
	for 10 seconds	the master.
	Off	The adaptor is not configured as the master.

[For assistance, please call: 1-800-272-7033] 19