Panasonic AW-DU600P manual Connections, Transmitting system connections, Connect the control panel

Connections

Turn off the power of all components before proceeding with the connections.

Transmitting system connections

Connect the control panel

	Coaxial cable
	(5C-2V)	Set the control panel
	10Base-T cable	selector switch to B.
		AW-PS301
Control	AW-DU600	RS-232C cable
panel
	Modem

AW-PS301

Telephone line

OWhen an AW-RP301 or AW-RP501 is being used, connect the receiving pan-tilt head system to the P1 CONTROL OUT connector.

OWhen an AW-RP505 or AW-RP605 is being used, it is possible to select either P1, P2, P3, P4 or P5 for the connected pan-tilt head system using the CONTROL button on the controller.

OWhen an AW-RP301, AW-RP501 or AW-RP505 is being used as the controller, an AW-PH350 can not be used as the pan-tilt head.

When an AW-RP605 is used

AW-RP605

Control panel

Version 45 or higher of the software must be installed in the AW-RP605.

Consult with your local dealer to check which software version is currently installed.

AW-RP605

Main unit

10Base-T cable

AW-DU600

Modem

AC adapter

AW-PS505

AC adapter

AW-PS301

Set the control panel selector switch to A.

Telephone line

6