Panasonic CQ-VX100W manual Picture is dark, Display does not go Back into the unit

Page 38

English

37

Troubleshooting (continued)

Common (continued)

Output

 

The conversion cable for AV 1 IN supplied with this unit is not used for the

disabled/distorted

 

terminal of AV1 IN.

 

aUse the conversion cable for AV 1 IN supplied with this unit for the

video/audio.

 

 

connection.

 

 

 

Display Settings

The picture is dark. The

picture is whitish. Something

is wrong with the picture. The picture is light in color.

The display does not go

back into the unit.

Radio

Poor reception or noise

The number of auto

preset stations is less

than 6.

Preset stations cannot

be stored.

CD

No playback or disc

ejected

Sound skipping or noise

Sound skipping due to

vibration

Disc unejectable

The screen is not adjusted properly.

aMake every adjustment of the screen.

The monitor stops on the way to the home position.

aPress [OPEN].

Antenna installation or wiring of antenna cable is faulty.

aCheck whether the antenna mounting position and its wiring are correct. In addition, check to see whether the antenna ground is securely connected to the chassis.

No power is supplied to the antenna amplifier (when using a film antenna, etc.).

aCheck the wiring of the antenna power lead.

The number of receivable stations is less than 6.

aMove to an area where receivable stations number is maximum, and try pre- setting.

The contact of the battery lead is poor, or the battery lead is not always powered.

aMake sure that the battery lead is connected securely, and preset stations again.

The disc is inserted upside down. aInsert a disc correctly.

There is a flaw or foreign object on the disc.

aRemove the foreign object, or use a flawless disc.

There is a flaw or foreign object on the disc.

aRemove the foreign object, or use a flawless disc.

The unit is not sufficiently secured.

aSecure the unit to the console box.

The unit is tilted at over 30˚ in the front-to-end direction. aMake the angle 30˚ or less.

Something such as a peeled label obstructs the disc coming out.

aPress and hold the [u] for more than 10 seconds (disc forced ejection). In case that the disc forced ejection does not work, consult your dealer.

The microcontroller in the unit operates abnormally due to noise or other factors.

aUnplug the power cord and plug it again. In case the unit is still out of order, consult your dealer.

38

CQ-VX100W

Image 38
Contents Model CQ-VX100W Do not use the unit when it is out of order Observe the following warnings when installingUse the proper power supply Protect the Deck MechanismInstallation Angle Observe the following cautions when using this unitFollow the instructions to install and wire the prod- uct Take care not to damage the leadsSafety Information Before Reading These Instructions ComponentsFeatures Contents Radio radio settings a Other SettingsDisc disc settings a PreparationDisc Marks Symbols used in this manualPictographs Name of Controls and Functions Remove the Face Plate Install the Face PlateFace Plate Removal Alarm Touch Panel Operation Overview State of Operation ScreenVideo Source Switching the DisplayAudio Source General Operations PowerGeneral Display Open/CloseFolding Down VolumeTilt Angle Display TemporarilyBefore Disc Playback Discs that can be Played BackDisc Eject DVD VCD When a disc is in the playerDisc Insert/Eject Because a disc is already loadedDisc Player VCD Video CD DivXBasic Operations From a specific Chapter/title SelectionShowing menu Chapter/titleUseful Function Displayed items CommonDivX Displayable charactersSupported file systems No warrantyCopyright Maximum number of files/foldersTuning RadioPreset Station Calling Preset MemoryAuto Preset Memory Preset Swap¡Connect an optional external device to the AV1/AV2 ¡You can set up the system so that the AV mode is notPreparation AV1/AV2 onEnglish Settings Touch Operation Screen Setup OperationExample setting screen Exit from the menuID-Code AdjustClock DisplayOther InputMemory Clear Aspect DimmerDisplay Balance/Fader Subtitle Language Video SettingAudio Language Menu LanguageAuto Preset Audio SettingFM Setup DivX RegistrationTouch . w Touch Disc About DivX VOD ContentDisplay the unit’s registration code Troubleshooting ACheck the speaker wiringDisplay does not go Back into the unit Check the wiring of the antenna power leadPicture is dark. Picture is whitish. SomethingThere is a flaw or foreign objects on the disc Audio format is output disabled for this unit such as dtsDisc has unplayable formatted data Picture may stop if the DivX files are greater than 2 GBCase you forget the ID code Error Display MessagesDivX VOD content has no available play count ID code memoProduct Servicing MaintenanceCleaning this Unit Replacing the FuseDVD-Rs/RWs Code Language Name Language Code ListOther cases... a Letterbox screen Dolby DigitalInteractive DVD Lpcm Linear PCM audioVp-p 75 Ω ¡Video input signal Composite video signal ¡S/N ratioKHz 1 602 kHz Vrms H x D 154 x 87 x 177 mmYFM264C059CA PTW1107-1018