Panasonic CQ-VW100W manual Balance/Fader, Bass, Treble

Basic Setting Screen Sound Disc Radio

Note:

¡The sound setting screen can be also activated by touch- ing Sound when the button is displayed. (a page 12)

SQ3

SQ3 setting

Six SQ presets are already provided at shipment in this unit.

Flat : flat frequency response

Pop : wide-ranged and deep sound

Rock : speedy and heavy sound

Jazz : jazz-specific deep sound

Club : club and disco-specific sound

Vocal : clear sound

default: Flat

You may set your own SQ or modify factory presettings in each memories by following the instructions below:

Adjusting level of each preset

q Select the preset SQ that you prefer to adjust.

w Touch or to select a frequency in a fre- quency band (BASS/MID/TRE).

e Touch or to adjust each frequency.

Adjustable range: –12 dB to +12 dB

Adjustable frequency:

BASS;	60 Hz, 80 Hz, 100 Hz, 200 Hz
MID;	500 Hz, 1 kHz, 2 kHz, 3 kHz
TRE;	10 kHz, 12 kHz, 15 kHz, 18 kHz

Note:

¡The new level adjustment will overwrite the previous level adjustment.

¡For resuming the factory settings, touch and hold

Default for more than 2 seconds.

			English
Balance/Fader
Balance/fader adjustment			32
		(Sound level adjustment
	Balance
		between right and left speakers)
[	: right enhanced
	: left enhanced
]
		Setting range: Right 15 to Left 15
		default: 0
		(Sound level adjustment between
	Fader
		front and rear speakers)
[	: front enhanced
	: rear enhanced
]
		Setting range: Front 15 to Rear 15
		default: 0

Bass/Treble

Bass/treble adjustment

Bass

[ : more

] : less

Treble

[ : more

] : less

(Bass adjustment)

(Treble adjustment)

Setting range: –12 dB to +12 dB default: 0 dB

CQ-VW100W

33