Panasonic CQ-VW100W manual Specifications, ¡Power Output X 4 ch ¡S/N ratio, KHz, 1 %, 4 Ω

Specifications

General		Audio section
¡Power supply	: 12 V DC (11 V – 16 V), test	¡Output voltage/	: 2 Vrms/600 Ω
	voltage 14.4 V, negative	Impedance
	ground	¡Frequency
¡Current consumption	: Less than 10 A (during disc	characteristics	: 20 Hz – 20 kHz (±1 dB)
	playback)	¡Dynamic range	: 96 dB (during CD playback)
¡Power Output	: 20 W x 4 ch	¡S/N ratio	: 95 dB (during CD playback)
	(1 kHz, 1 %, 4 Ω)	Monitor
¡Maximum power output	: 50 W x 4 ch
¡Compatible speaker	: 4 Ω	¡Liquid crystal panel	: 7-inch wide
impedance		¡Screen dimensions
¡Video input signal	: Composite video signal, 1.0	(W x H x D)	: 154 x 87 x 177 mm
	Vp-p (75 Ω)	¡Number of pixels	: 336 960 pixels (234 vertical
¡Audio input sensitivity	: 2 Vrms		x 480 horizontal x 3)
¡Video output signal	: Composite video signal, 1.0	¡Valid pixel ratio	: Over 99.99%
	Vp-p (75 Ω)	¡Display method	: Transparent color filter for-
¡Pre-Amp output voltage	: 2 Vrms		mat
¡Pre-Amp output impedance: Less than 600 Ω		¡Drive method	: TFT (Thin Film Transistor)
¡Dimensions (W x H x D) : 178 x 100 x 160 mm			active matrix format
¡Weight	: 2.3 kg
FM stereo radio	: 87.5 MHz – 108 MHz
¡Frequency range
¡Usable sensitivity	: 7 dB/µV
¡Stereo separation	: 30 dB (1 kHz)
¡S/N ratio	: 62 dB
AM radio	: 531 kHz – 1 602 kHz
¡Frequency range
¡Usable sensitivity	: 28 dB/µV
¡Image rejection ratio	: 50 dB

Note:

¡Specifications and the design are subject to modification without notice due to improvements in technology. ¡Some figures and illustrations on this manual may be different from your product.

English

44

Playable region number

This operating instruction manual is for 3 models CQ-VW100W2/CQ-VW100W3 and CQ-VW100W5. The following table shows the playable region number for each model.

Model

CQ-VW100W2

CQ-VW100W3

CQ-VW100W5

Playable region number

2(ALL)

3(ALL)

5(ALL)

CQ-VW100W

45