Panasonic CF-72 Series appendix Read Me First, For U.S.A

Page 3

Read Me First

For U.S.A.

Federal Communications Commission Radio Frequency Interference Statement

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the Panasonic Service Center or an experienced ra- dio/TV technician for help.

Warning

To assure continued compliance, use only shielded interface cables when connecting to a computer or peripheral. Also, any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

FCC RF Exposure Warning: This computer is provided with PC Card slots that could be used with wireless transmitter(s), which will be specifically recommended, when they become available. Other third-party wireless transmitter(s) have not been RF exposure evaluated for use with this computer and may not comply with FCC RF exposure requirements.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and

(2)This device must accept any interference received, including interference that may cause undesired operation.

Responsible Party: Matsushita Electric Corporation of America

One Panasonic Way

Secaucus, NJ 07094

Tel No:1-800-LAPTOP-5 (1-800-527-8675)

FCC Regulation Notice for modem

This equipment contains a FCC approved modem.

Manufacturer of modem: AMBIT Microsystems Corporation Model No. J07.017.C.00

Tested To Comply

With FCC Standards

FOR HOME OR OFFICE USE

1.This equipment complies with Part 68 of the FCC rules. On the computer is a label that contains, among other informa- tion, the FCC registration number and ringer equivalence number (REN) for this equipment. If required, this informa- tion must be provided to the telephone company.

2.An FCC compliant telephone cord and modular plug is pro- vided with this equipment. This equipment is designed to be connected to the telephone network or premises wiring using a compatible modular jack which is Part 68 compliant. See Installation Instructions for details.

3.The REN is used to determine the quantity of devices which may be connected to the telephone line. Excessive RENs on the telephone line may result in the devices not ringing in response to an incoming call. In most, but not all area, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company.

4.If your telephone equipment cause harm to the telephone net- work, the telephone company will notify you in advice that temporary discontinuance of service may be required. But if advice notice isn’t practical, the telephone company will no- tify the customer as soon as possible. Also, you will be ad- vised of your right to file a complaint with the FCC if you believe it is necessary.

5.The telephone company may take changes in it’s facilities, equipment, operations or procedures that could affect the op- eration of the equipment. If this happens the telephone com- pany will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service.

6.If trouble is experienced with this equipment, for repair or warranty information, please contact Matsushita Electric Corporation of America at DIAL TOLL FREE 1-800-LAP- TOP5 (1-800-527-8675). If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equipment until the problem is resolved.

7.There are no user serviceable parts contained in this equipment.

8.This equipment may not be used on coin service provided by the telephone company. Connection to party lines is subject to state tariffs.

9.The Telephone Consumer Protection Act of 1991 makes it un- lawful for any person to use a computer or other electronic device to send any message via a telephone fax machine un- less such message clearly contains in a margin at the top or bottom of each transmitted page or on the first page of the transmission, the date and time it is sent and an identification of the business or other entry, or other individual sending the message and the telephone number of the sending machine or such business, other entity, or individual. In order to program this information into your fax software, you should refer to the manual of the Fax software being used.

10.According to the FCC’s electrical safety advisory, we recom- mend that you may install an AC surge arrestor in the AC outlet to which this equipment is connected. Telephone companies re- port that electrical surges, typically lightning transients, are very destructive to customer terminal equipment connected to AC power sources and that this is a major nationwide problem.

“Caution: To reduce the risk of fire, use only No.26 AWG or larger telecom- munication line cord.”

“ATTENTION: Pour réduire le risque d’incendie, utiliser uniquement des conducteurs de télécommunications 26 AWG ou de section supérieure.”

Notice for the products using LCD

This product uses one or more fluorescent lamps containing a small amount of mercury. It also contains lead in some compo- nents. Disposal of these materials may be regulated in your com- munity due to environmental considerations. For disposal or re- cycling information please contact your local authorities, or the Electronics Industries Alliance: <http://www.eiae.org/>

Getting Started

3

Page 2 Page 4
Image 3
Page 2 Page 4
Contents Operating Instructions Disclaimer Trademarks IntroductionIllustrations and Terminology in this Manual CopyrightFor U.S.A Read Me FirstRead Me First For CanadaIndustry Canada IC Notice for modem Handling Lithium BatteryCD Drive Caution UsagePeripherals Cables Precautions Battery PackComputer Viruses When Using Peripheral DevicesSaving Data on the Hard Disk Saving Data on Floppy DisksEnvironment MaintenanceUsage Environment HandlingRead the Limited USE License Agreement Insert the battery packFirst-time Operation Confirm the inclusion of all partsTurn your computer on Connect your computer to a power outletFirst-time Operation Open the displaySetup Windows Select the Operating SystemOnly for models with touchscreen This concludes the first-time use operation guidelines Resetting the passwordEject Button Insert the shutter-sideSelect Start All Programs Panasonic Create headfirst Is displayed Power Indicator Power SwitchStarting Up/Shutting Down Starting UpSelect your application Input your passwordRestarting your computer without shutting down Shutting Down power off your computerStarting Up/Shutting Down Confirm shut downWork Surface Touch Pad Basic OperationReference Manual List of Error Codes List of Error Codes Starting Up Dealing with Problems SummaryShift Dealing with Problems SummaryDisplay Fn +Shutting down Battery IndicatorFast User Switching function Windows XP Reference ManualPreparing Reinstalling SoftwareBefore Reinstallation ReinstallingPress F2 and then run the Setup Utility Limited USE License Agreement Contrat de licence d’usage limité LicenceTermes, clauses et conditions Names and Functions of Parts External Display Port Expansion Bus ConnectorDC-IN Jack USB PortsMain Specifications SpecificationsOperating System SoftwareLimited Warranty Panasonic Computer and Peripherals Limited Warranty Memo Appendix Panasonic Computer Solutions Company Panasonic Canada Inc

CF-72 Series specifications

The Panasonic CF-72 Series has gained recognition for its durability, performance, and advanced technologies, making it a preferred choice for professionals in demanding environments. This rugged laptop series is designed to withstand harsh conditions, offering features that cater to a wide range of applications.

One of the most notable characteristics of the CF-72 Series is its robust construction. Built to military specifications, the laptop can endure extreme temperatures, shocks, and vibrations, ensuring reliability even in the most challenging outdoor settings. The magnesium alloy case and reinforced HDD provide an extra layer of protection, while the spill-resistant keyboard helps safeguard against accidental liquid spills.

The CF-72 Series utilizes advanced processing power, incorporating Intel processors that deliver exceptional performance for multitasking and demanding applications. With ample RAM options, users can smoothly run various software programs, increasing productivity and efficiency. The solid-state drive (SSD) option enhances data access speed, ensuring quick boot times and rapid file retrieval.

Another key feature of the CF-72 Series is its high-resolution display, which offers excellent brightness and clarity for outdoor visibility. The sunlight-readable touchscreen option allows for easy navigation and operation in various lighting conditions, making it an ideal choice for fieldwork. Additionally, the device comes with integrated graphics that support high-definition visuals, suitable for both professional and multimedia applications.

Connectivity is a strong point of the CF-72 Series, with multiple ports including USB, HDMI, and serial connections, ensuring compatibility with various peripherals and devices. The inclusion of wireless connectivity options like Wi-Fi and Bluetooth enables seamless communication and data transfer, essential for professionals on-the-go.

The battery life of the CF-72 Series is designed to support long hours of operation, with options for extended batteries to meet the needs of users who require extended mobility without the need for frequent recharging. This feature is particularly valuable for field engineers, technicians, and other professionals who work in remote locations.

In summary, the Panasonic CF-72 Series combines rugged design, powerful performance, and advanced technology to cater to the needs of professionals in demanding environments. Its durability, impressive features, and user-focused design make it a reliable choice for anyone seeking a tough and efficient laptop solution. Whether used in construction, military, or any other field, the CF-72 proves to be a versatile tool that enhances productivity and performance.
Top Page Image Contents