Panasonic CF-72 Series P appendix Reinstalling Software, Before Reinstallation, Preparing, Enter

Page 25

Reinstalling Software

Before Reinstallation

Preparing

You will need the Product Recovery CD-ROM and the BACKUP DISK (e.g., FIRSTAID FD) you made earlier. ( page 14)

NOTE

If you have not created the BACKUP DISK, you can create by selecting [Create BACKUP DISK] in [Start] - [Programs] - [Panasonic]. If you can not create this disk, contact Panasonic Technical Support.

The SuperDisk drive (CF-VFS712) is required for the following reinstallation procedure.

Important

Save all important data. If reinstallation is carried out, all data existing prior to the installation will be lost. The reinstal- lation will return the computer to close to the conditions at time of purchase.

Before the reinstallation procedure, remove all peripherals (except for the CD-ROM/DVD-ROM drive). Be sure the AC adaptor is connected until the reinstallation procedure is completed.

Reinstalling

CAUTION

If data on your hard disk is compressed, the data should be uncompressed.

1Turn the computer off and set the CD-ROM/DVD-ROM drive in the multimedia pocket, and then turn the com- puter on.

2When the message [Press <F2> to enter SETUP] is dis-

played, press F2 and then run the Setup Utility.

If the password has been set, enter the Supervisor Pass- word.

3Write down all of the contents of the Setup Utility and

then press F9 .

At the confirmation message, select [Yes] and press

Enter .

 

 

4 Select [Boot] menu, press

/

and F5 / F6 until

[CD Drive] is at the top of the [Boot] menu and [SuperDisk Drive] is the next position.

5Set the Product Recovery CD-ROM* in the CD-ROM/ DVD-ROM drive.

*Windows 2000:Product Recovery CD-ROM 1

6Press F10 .

At the confirmation message, select [Yes] and press Enter . The computer will reboot, and this screen should

7Make a selection from the menu.

To restore all contents of the hard disk to factory de- fault, including the partition setting(s):

Select [1. Restore the whole HDD to factory default].

Windows 98

To restore the hard disk (C drive) to factory default, excluding the partition setting(s):

Select [2. Restore the drive C to factory default].

Windows 2000

To reinstall Windows 2000 to the first partition to fac- tory default:

Select [2. Restore Windows 2000 to the first partition].

In such cases, the initial partition size must be 4 GB or more of the hard disk size. Reinstallation cannot be performed with a small partition size.

NOTE

If "The program has detected an error 110 on the par- tition starting at sector xxxxxxxx on disk1." is dis- played, select [Yes].

8At the confirmation message , press Y .

appear.

Windows 98

Windows NT

-------------------------------------------------

Select the number

-------------------------------------------------

1.Restore the whole HDD to factory default

2.Restore the drive C to factory default

3.End

-------------------------------------------------

Select the number

-------------------------------------------------

1.Restore the whole HDD to factory default

2.End

Windows 98 Windows NT

The operation of reinstallation for the hard disk starts au- tomatically. (The operations take about one hour.)

1

After the “restore” procedure completes, a message will

 

be displayed. Remove the Product Recovery CD-ROM,

 

then close the tray.

2

Turn the computer off and remove the CD-ROM/DVD-

 

ROM drive.

3

Set the SuperDisk drive in the multimedia pocket, put

 

the FIRSTAID FD into the SuperDisk drive, turn the

 

computer on.

Windows 2000

-------------------------------------------------

 

Select the number

 

-------------------------------------------------

1.Restore the whole HDD to factory default

2.Restore Windows2000 to the first partition

3.End

Follow the on-screen instructions.

(To next page)

25

Page 24 Page 26
Image 25
Page 24 Page 26
Contents Operating Instructions Illustrations and Terminologies in this Manual IntroductionCopyright Disclaimer TrademarksFor U.S.A Read Me FirstReorient or relocate the receiving antenna One Panasonic Way Secaucus, NJ Tel No1-800-LAPTOP-5For Canada Read Me FirstIndustry Canada IC Notice for modem Precautions Lithium BatteryCD-ROM/DVD-ROM Drive Caution UsagePeripherals Cables Precautions Battery PackMended Saving Data on Disks Saving Data on the Hard DiskComputer Viruses System File Checker WindowsUsage Environment MaintenanceEnvironment Places not to use your computerFirst-time Operation Insert the battery packConfirm the inclusion of all parts Write down the Product Key or Product IDFirst-time Operation Connect your computer to a power outletOpen the display Turn your computer onTo next Setup WindowsFirst-time Operation This concludes the first-time use operation guidelines Install the Acrobat ReaderMake sure a disk is not in the write-protected state Eject ButtonWork Surface Touch Pad Basic OperationDragging Reference Manual IndicatorMovable splitter bar Display of the manualYou must first enter your password Security Measures If security indicator is displayedStarting Up/Shutting Down Starting UpStarting Up/Shutting Down Input your passwordSelect your operating system LogonDisplay the shut down screen Shutting Down power off your computerConfirm shut down Restarting your computer without shutting downList of Error Codes Troubleshooting Starting Up Dealing With Problems SummaryNT does not start up Application Software Battery IndicatorDisplay Reference Manual Dealing With Problems SummaryShutting down Press Fn + F3 againBefore Reinstallation Reinstalling SoftwareReinstalling PreparingSetup Windows after reinstalling Reinstalling SoftwareCtrl + Alt + Del F10When the installation completes, select Restart Now Limited USE License Agreement Licence Contrat de licence dusage limitéTermes, clauses et conditions Names and Functions of Parts DC-IN Jack USB Ports Expansion Bus ConnectorRAM Module Slot External Display PortMain Specifications SpecificationsOther Specifications Limited Warranty Panasonic Computer and Peripherals Limited Warranty Panasonic Personal Computer Company Panasonic Canada Inc

CF-72 Series P specifications

The Panasonic CF-72 Series P is a robust and versatile laptop, designed to meet the demands of mobile professionals and field workers. Known for its durability, this model is part of Panasonic's esteemed Toughbook lineup, which is celebrated for providing reliable computing solutions in challenging environments. The CF-72 Series P embodies a blend of power, portability, and practicality, making it an ideal choice for industries such as law enforcement, military, healthcare, and field service.

One of the standout features of the CF-72 is its rugged design. The laptop is built to withstand drops, spills, and extreme temperatures, ensuring that it can function effectively in harsh conditions. It meets military specifications for toughness and durability, which means it can withstand shocks and vibrations, making it suitable for use in vehicles or outdoor settings.

In terms of performance, the CF-72 comes equipped with powerful processors and ample RAM, providing the capability to run demanding applications seamlessly. The device typically features Intel Core processors, ensuring quick boot times and efficient multitasking. Users can expect smooth performance while handling various workloads, from data entry to complex data analysis.

The CF-72 also boasts a large, high-resolution display, which is essential for professionals who need to view detailed applications and documents on-the-go. The screen often features anti-glare technology, making it easier to read in bright outdoor conditions. Additionally, the laptop includes a full-sized keyboard, designed for comfortable typing over extended periods.

Connectivity is another key aspect of the CF-72. It offers multiple ports, including USB, Ethernet, and serial ports, which are crucial for connecting to various peripherals and networks. Some models may also support wireless technologies such as Wi-Fi and Bluetooth, allowing users to stay connected wherever they are.

Battery life is a significant consideration for mobile professionals, and the Panasonic CF-72 addresses this need with an extended battery option. This feature ensures that users can work longer hours without needing to recharge, making it ideal for those who work in remote locations or on the road.

Overall, the Panasonic CF-72 Series P stands out in the crowded marketplace of mobile computing. With its dedication to durability, powerful performance, and user-friendly features, it continues to serve as a reliable solution for professionals who require a tough and dependable laptop. As technology and user demands evolve, the CF-72 remains a compelling option for those seeking a rugged portable computer.
Top Page Image Contents