Panasonic CF-72 Series P appendix Reinstalling Software, Setup Windows after reinstalling, F10

Page 26

Reinstalling Software

Windows 2000

When the message “Insert media 2...” is displayed, insert Product Recovery CD-ROM 2 after removing Product Re- covery CD-ROM 1, and then immediately press [OK].

NOTE

If [OK] is not immediately pressed:

The message “The media does not contain the cor- rect file” may appear. In such cases, the message “Insert media 2...” is displayed again when [OK] is pressed. Confirm that Product Recovery CD-ROM 2 has been inserted by opening the tray of the CD- ROM/DVD-ROM drive, and then close the tray and immediately press [OK].

9After the reinstallation procedure completes, the follow- ing message will appear on the display.

Windows 98 Windows NT

All data on the whole HDD has been restored to the factory default. After removing floppy disk and the Product Recovery CD-ROM, restart the computer and set up Windows again.

Remove the disk, then restart the computer by pressing

Ctrl + Alt + Del .

Windows 2000

Windows2000 install wizard will start after reboot.

Restore process will execute more after Windows2000 install wizard.

After removing the Product Recovery CD, power off your computer.

Replace the CD-ROM pack with the SDD.

Turn your computer on to continue re-installation.

Remove the Product Recovery CD-ROM and then power the computer off. Replace the CD-ROM/DVD-ROM drive with the SuperDisk drive and turn the computer on.

10Windows NT

 

Restart the computer automatically.

 

 

If the message "Preinstallation completed successfully.

 

Press any key to shut down/reboot." is displayed, press

 

any key.

 

 

 

11 When the message [Press <F2> to enter SETUP] is dis-

 

played, press

F2 and then run the Setup Utility.

 

If the password has been set, enter the Supervisor Pass-

 

word.

 

 

 

Troubleshooting

12 Press

F9 .

 

 

At the confirmation message, select [Yes] and press

 

 

Enter . (The Setup Utility settings will return to their

 

default values. Even the security settings with the excep-

 

tion of the password(s) will return to their default val-

 

ues.)

 

 

 

 

Change the settings where necessary.

 

 

13 Press

F10 .

 

 

 

At the confirmation message, select [Yes] and press

 

Enter .

 

 

 

14 Perform the setup procedure for Windows by following

 

the instructions on the screen.

 

 

Windows 98

Windows 2000

page 11

 

Windows NT

Described on the right

15Windows 2000

<When the BACKUP DISK has been created page 14> Set the BACKUP DISK and select [OK].

(If the BACKUP DISK has not been created, select [Can-

26 cel].)

Windows NT

Setup Windows after reinstalling

1The Software License Agreement will be displayed. After reading the agreement, select [I Agree].

NOTE

If [I Disagree] is selected, the Windows setup will be aborted.

Moving the cursor () or clicking buttons can be performed with the touch pad.

2Select [Next].

3Input your name and organization, then select [Next]. (It is possible to omit the organization item.)

4Input the Product ID written down in the column “Customer’s record” (page 2) then select [Next]. To move the cursor to a particular item, press

Tab or click the desired box.

5Input your computer name and select [Next].

6Input an Administrator password and select [Next].

CAUTION

Remember this password! If the password is for- gotten, Windows NT cannot be operated.

7Select [Next].

8Select [Do not connect this computer to a network at this time], then select [Next].

(Settings can be made for a network even after Win- dows starts up. In this case, be sure to read [When Adding New Software or Hardware Components] in the Reference Manual [Technical Information].)

When establishing settings for a network:

The settings will vary for different network envi- ronments depending on the network system being used. For more details, ask your system adminis- trator or the person in charge of the network. Fol- low the on-screen instructions.

(If the LAN driver is in the floppy disk, install the driver by using the floppy disk drive after Windows Setup.)

NOTE

It takes several minutes for the necessary files to be copied. If the computer enters the ECO mode, the power to the LCD is automatically turned off. In this case, press a key unrelated to the direct triggering of a selection, like Ctrl .

Page 25 Page 27
Image 26
Page 25 Page 27
Contents Operating Instructions Copyright IntroductionIllustrations and Terminologies in this Manual Disclaimer TrademarksReorient or relocate the receiving antenna Read Me FirstFor U.S.A One Panasonic Way Secaucus, NJ Tel No1-800-LAPTOP-5Industry Canada IC Notice for modem Read Me FirstFor Canada CD-ROM/DVD-ROM Drive Caution Lithium BatteryPrecautions UsageMended Precautions Battery PackPeripherals Cables Computer Viruses Saving Data on the Hard DiskSaving Data on Disks System File Checker WindowsEnvironment MaintenanceUsage Environment Places not to use your computerConfirm the inclusion of all parts Insert the battery packFirst-time Operation Write down the Product Key or Product IDOpen the display Connect your computer to a power outletFirst-time Operation Turn your computer onSetup Windows To nextFirst-time Operation Install the Acrobat Reader This concludes the first-time use operation guidelinesEject Button Make sure a disk is not in the write-protected stateDragging Touch Pad Basic OperationWork Surface Movable splitter bar IndicatorReference Manual Display of the manualStarting Up/Shutting Down If security indicator is displayedYou must first enter your password Security Measures Starting UpSelect your operating system Input your passwordStarting Up/Shutting Down LogonConfirm shut down Shutting Down power off your computerDisplay the shut down screen Restarting your computer without shutting downList of Error Codes Troubleshooting NT does not start up Dealing With Problems SummaryStarting Up Display Battery IndicatorApplication Software Shutting down Dealing With Problems SummaryReference Manual Press Fn + F3 againReinstalling Reinstalling SoftwareBefore Reinstallation PreparingCtrl + Alt + Del Reinstalling SoftwareSetup Windows after reinstalling F10When the installation completes, select Restart Now Limited USE License Agreement Termes, clauses et conditions Contrat de licence dusage limitéLicence Names and Functions of Parts RAM Module Slot Expansion Bus ConnectorDC-IN Jack USB Ports External Display PortSpecifications Main SpecificationsOther Specifications Limited Warranty Panasonic Computer and Peripherals Limited Warranty Panasonic Personal Computer Company Panasonic Canada Inc

CF-72 Series P specifications

The Panasonic CF-72 Series P is a robust and versatile laptop, designed to meet the demands of mobile professionals and field workers. Known for its durability, this model is part of Panasonic's esteemed Toughbook lineup, which is celebrated for providing reliable computing solutions in challenging environments. The CF-72 Series P embodies a blend of power, portability, and practicality, making it an ideal choice for industries such as law enforcement, military, healthcare, and field service.

One of the standout features of the CF-72 is its rugged design. The laptop is built to withstand drops, spills, and extreme temperatures, ensuring that it can function effectively in harsh conditions. It meets military specifications for toughness and durability, which means it can withstand shocks and vibrations, making it suitable for use in vehicles or outdoor settings.

In terms of performance, the CF-72 comes equipped with powerful processors and ample RAM, providing the capability to run demanding applications seamlessly. The device typically features Intel Core processors, ensuring quick boot times and efficient multitasking. Users can expect smooth performance while handling various workloads, from data entry to complex data analysis.

The CF-72 also boasts a large, high-resolution display, which is essential for professionals who need to view detailed applications and documents on-the-go. The screen often features anti-glare technology, making it easier to read in bright outdoor conditions. Additionally, the laptop includes a full-sized keyboard, designed for comfortable typing over extended periods.

Connectivity is another key aspect of the CF-72. It offers multiple ports, including USB, Ethernet, and serial ports, which are crucial for connecting to various peripherals and networks. Some models may also support wireless technologies such as Wi-Fi and Bluetooth, allowing users to stay connected wherever they are.

Battery life is a significant consideration for mobile professionals, and the Panasonic CF-72 addresses this need with an extended battery option. This feature ensures that users can work longer hours without needing to recharge, making it ideal for those who work in remote locations or on the road.

Overall, the Panasonic CF-72 Series P stands out in the crowded marketplace of mobile computing. With its dedication to durability, powerful performance, and user-friendly features, it continues to serve as a reliable solution for professionals who require a tough and dependable laptop. As technology and user demands evolve, the CF-72 remains a compelling option for those seeking a rugged portable computer.
Top Page Image Contents