Panasonic CF-T4 operating instructions Read Me First, For U.S.A

Page 3

Read Me First

For U.S.A.

Federal Communications Commission Radio Fre- quency Interference Statement

Note: This equipment has been tested and found to com- ply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer- ence in a residential installation. This equipment gener- ates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television recep- tion, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

zReorient or relocate the receiving antenna.

zIncrease the separation between the equipment and receiver.

zConnect the equipment into an outlet on a circuit differ- ent from that to which the receiver is connected.

zConsult the Panasonic Service Center or an experi- enced radio/TV technician for help.

Warning

To assure continued compliance, use only shielded inter- face cables when connecting to a computer or peripheral. Also, any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.

FCC RF Exposure Warning:

zThis computer is provided with a PC Card slot that could be used with wireless transmitter(s), which will be specifically recommended, when they become available. Other third-party wireless transmitter(s) have not been RF exposure evaluated for use with this computer and may not comply with FCC RF exposure requirements.

zThis equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

zThis equipment must be installed and operated in accordance with provided instructions and minimum 1.5 cm spacing must be provided between antenna and all person’s body (excluding extremities of hands, wrist and feet) during wireless modes of operation.

zThis transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

This product is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range.

FCC requires this product to be used indoors for the fre- quency range 5.15 to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite sys- tems.

High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These

radar stations can cause interference with and /or dam- age this product.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1)This device may not cause harmful interference, and

(2)This device must accept any interference received, including interference that may cause undesired oper- ation.

Responsible Party: Panasonic Corporation of North America

One Panasonic Way

Secaucus, NJ 07094

Tel No:1-800-LAPTOP5 (1-800-527-8675)

FCC Regulation Notice for modem

This equipment contains a FCC approved modem.

1.This equipment complies with CFR47 Part 68 rules. On the computer is a label that contains, among other information, the FCC registration number and ringer equivalence number (REN) for this equipment. If required, this information must be provided to the tele- phone company.

2.An FCC compliant telephone cord and modular plug is provided with this equipment. This equipment is designed to be connected to the telephone network or premises wiring using a compatible modular jack which is Part 68 compliant. See Installation Instruc- tions for details.

3.The REN is used to determine the quantity of devices which may be connected to the telephone line. Exces- sive RENs on the telephone line may result in the devices not ringing in response to an incoming call. In most, but not all area, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as deter- mined by the total RENs, contact the local telephone company.

4.If your telephone equipment cause harm to the tele- phone network, the telephone company will notify you in advice that temporary discontinuance of service may be required. But if advice notice isn’t practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary.

5.The telephone company may take changes in its facili- ties, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service.

Preparations

3

Image 3
Contents Personal Computer Model No. CF-T4 Series Introduction Copyright Disclaimer TrademarksIllustrations and Terminology in this Manual For U.S.A Read Me FirstIndustry Canada IC Notice for modem For CanadaIndustry Canada Information to the User Lithium BatteryFor Europe Declaration of Conformity DoCCompliance Notice CE Mark Precautions ‹Usage‹Handling Do not pull or insert the DC plug if your hands are wet Clean the DC plug of dust and other debris regularlyHold the plug when unplugging the AC cord Do not turn the volume up to loud when using headphonesPrecautions Battery Pack How to Use this Manual Manual Types and ContentsHow to Use the Onscreen Manual ECO Names and Functions of PartsPreparations Read the Limited USE License Agreement Î Turn the computer over and insert the battery packFirst-time Operation Confirm the inclusion of all partsHandling the AC adaptor Connect your computer to a power outletOpen the display Turn your computer onFirst-time Operation Setup Windows‹This concludes the first-time use operation guidelines Create User Accounts to recognize this computers userCalibrate the touchscreen Password Reset Function ‹When you have forgotten a Windows log-on passwordAbout the Icon Enlarger Select your application Starting Up/Shutting DownStarting Up Log-on to WindowsClick Turn Off Shutting Down power off your computer‹To shut down using the keyboard ‹When you leave the computer or interrupt your workHow to Use the Hand Strap Using the Tether‹Attaching the Tether ‹Stowing the stylus ‹When the cursor doesn’t move the way you want it to Using the Touch Pad‹Inserting Power off your computer. ÎExpanding Memory Inserting / Removing the RAM Module‹Removing Put the cover and battery pack back in placeHandling Usage/Handling/MaintenanceMaintenance Usage EnvironmentWhen areas excluding the display/the touch pad become dirty To enable IEEE802.11a Wireless LANTurning on/off the Wireless LAN Power Enable/Disable Wireless LAN Standard IEEE802.11aChange the Way Users Log on or off ‹Use Fast User SwitchingWindows/Antivirus Protection WindowsSecurity Center/Antivirus Protection Windows Security CenterIf the message Your computer might be at risk is displayed Windows Update Pop-up BlockerComputer Viruses To Protect Data When Using Peripheral DevicesWhen Changing Hard Disk Partitions Internal Hard DiskList of Error Codes Dealing with Problems Summary May not cause the processing speed to increase ‹Problems with Display ‹Problems with Passwords and MessagesEnter Space Esc ‹Problems with Battery ‹Problems with Operation during Use‹Problems with Expanding Memory ‹Problems with Onscreen Reference ManualBefore Reinstallation Reinstalling SoftwareChange the settings in the Setup Utility ReinstallingReturn the Setup Utility settings to their default values Reinstalling SoftwareIf you can connect to the Internet, perform Windows Update About Intel software products Limited USE License AgreementContrat de licence dusage limité LicenseTermes, clauses et conditions Hard Disk Backup Function Before Using a Hard Disk Backup Function‹Precautions Create a Backup Area Backing Up and Restoring Data Hard Disk Backup FunctionTo disable the hard disk backup function ‹Confirm the followings When Disposing of This ComputerHard Disk Data Erase Utility Before Erasing Data ‹PreparingImportant Information Main Specifications SpecificationsMB = 1,048,576 bytes Limited Warranty For Canada Panasonic Computer Solutions Company Panasonic Canada Inc