Read Me First, Models for U.S.A, Getting Started

void the user’s authority to operate this equipment. FCC RF Exposure Warning:

Warning

To assure continued compliance, use only shielded inter- face cables when connecting to a computer or peripheral. Also, any changes or modifications not expressly approved by the party responsible for compliance could

Note: This equipment has been tested and found to com- ply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer- ence in a residential installation. This equipment gener- ates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television recep- tion, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit differ- ent from that to which the receiver is connected. Consult the Panasonic Service Center or an experi- enced radio/TV technician for help.

quency Interference Statement

Read Me First

Models for U.S.A.

<Only for model with a “ ” mark on the bottom of the computer>

Federal Communications Commission Radio Fre- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and

(2)This device must accept any interference received, includ- ing interference that may cause undesired operation.

Responsible Party: Panasonic Corporation of North America

One Panasonic Way

Secaucus, NJ 07094

Tel No:1-800-LAPTOP5 (1-800-527-8675)

6-M-1

FCC Regulation Notice for modem

This equipment contains a FCC approved modem.

Getting Started

6-M-1

This computer is provided with a PC Card slot that could be used with wireless transmitter(s), which will be spe- cifically recommended, when they become available.

Other third-party wireless transmitter(s) have not been RF exposure evaluated for use with this computer and may not comply with FCC RF exposure requirements.

<Only for model with wireless LAN/wireless WAN/Bluetooth> This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.

This equipment must be installed and operated in accordance with provided instructions and minimum

1.5cm spacing must be provided between antenna and all person’s body (excluding extremities of hands, wrist and feet) during wireless modes of operation. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

25-M-2-3

This product is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range.

FCC requires this product to be used indoors for the fre- quency range 5.15 to 5.25 GHz to reduce the potential for harmful interference to co-channel Mobile Satellite sys- tems. High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interference with and/or damage this product.

25-M-W-1

1.This equipment complies with CFR47 Part 68 rules. On the computer is a label that contains, among other information, the FCC registration number and ringer equivalence number (REN) for this equipment. If required, this information must be provided to the tele- phone company.

2.An FCC compliant telephone cord and modular plug is provided with this equipment. This equipment is designed to be connected to the telephone network or premises wiring using a compatible modular jack which is Part 68 compliant. See Installation Instruc- tions for details.

3.The REN is used to determine the quantity of devices which may be connected to the telephone line. Exces- sive RENs on the telephone line may result in the devices not ringing in response to an incoming call. In most, but not all area, the sum of RENs should not exceed five (5.0). To be certain of the number of devices that may be connected to a line, as deter- mined by the total RENs, contact the local telephone company.

4.If your telephone equipment cause harm to the tele- phone network, the telephone company will notify you in advice that temporary discontinuance of service may be required. But if advice notice isn’t practical, the telephone company will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it is necessary.

5.The telephone company may take changes in its facili- ties, equipment, operations or procedures that could affect the operation of the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary modifications to maintain uninterrupted service.

6.If trouble is experienced with this equipment, for repair or warranty information, please contact Panasonic Corporation of North America at DIAL TOLL FREE 1- 800-LAPTOP5 (1-800-527-8675). If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the equip- ment until the problem is resolved.

7.There are no user serviceable parts contained in this equipment.

Appendix Troubleshooting Useful Information

CF-T7 specifications

The Panasonic CF-T7 is a robust and compact laptop designed specifically for business professionals who need durability, portability, and performance in their daily computing tasks. Part of Panasonic's Toughbook line, the CF-T7 embodies a balance between high performance and rugged design, making it an excellent choice for users in demanding environments such as fieldwork, healthcare, and transportation.

One of its standout features is the lightweight chassis, weighing just around 3.5 pounds. Despite its sleek design, the CF-T7 is built to withstand rough handling, with a MIL-STD-810G certification for shock and vibration resistance. This makes it suitable for use in various challenging conditions, ensuring reliability and longevity for users who are constantly on the go.

Powering the CF-T7 is an Intel Core i5 processor, providing sufficient performance for multitasking and running resource-intensive applications. Coupled with up to 8GB of RAM and a choice of solid-state drives, users can expect fast boot times and swift file access. The optional 4G LTE connectivity ensures that professionals can stay connected even in areas without Wi-Fi, adding to the device's adaptability.

The 12.5-inch display, although modest in size, offers full HD resolution, allowing for crisp visuals and vibrant colors. Its touch screen feature enhances usability, particularly for tasks that benefit from direct interaction. The display is also designed to be viewable in bright sunlight, making it effective for outdoor use.

Security is a prominent focus of the CF-T7, equipped with features such as a fingerprint reader and smart card reader. These elements provide an extra layer of protection for sensitive business data, making it an ideal choice for industries where data security is paramount.

Battery life is another key characteristic, with the CF-T7 boasting a long-lasting power source capable of running for up to 18 hours on a single charge, depending on usage. This is particularly beneficial for professionals who need to work uninterrupted during long hours away from an outlet.

Overall, the Panasonic CF-T7 stands out as a versatile and durable laptop that caters to a niche market. Its blend of power, portability, and ruggedness makes it an excellent tool for business users, ensuring they can perform optimally in both controlled and demanding environments.