Panasonic CF-T7 Create a new account, Perform the touchscreen calibration, Regarding Windows XP

6 Create a new account.

Click [start] - [Control Panel] - [User Accounts] - [Create a new account].

CAUTION

Remember your password. If you forget the password, you cannot use the Windows operation system. Creating a password reset disk beforehand is recommended.

7 Perform the touchscreen calibration.

<Only for model with Windows XP Professional>

AClick [start] - [All Programs] - [Fujitsu Touch Panel (USB)] - [Touch Screen Calibration Utility].

BTouch the 9 “+” target marks sequentially with the stylus, and then press

Enter.

CClick [Save & Exit].

<Only for model with Windows XP Tablet PC Edition>

AClick [start] - [Control Panel] - [Other Control Panel Options] - [Tablet Cali- bration].

BTouch the 9 “+” target marks sequentially with the stylus.

CTouch [OK] and restart the computer.

DClick [start] - [Control Panel] - [Printers and Other Hardware] - [Tablet and Pen Settings].

ESelect [Landscape] and click [Calibrate] with [Calibration] in [Settings].

FTouch the 4 “+” target marks sequentially with the stylus.

GClick [OK].

HSelect [Portrait] and click [Calibrate] with [Calibration] in [Settings].

IRepeat step F and G above.

Perform steps D - I for each account.

NOTE

Regarding Windows XP

You can select the Classic view of Control Panel or the Classic Start menu. You can also change the way a user logs on or off. This manual explains using the Windows XP default setting (not Classic view or Classic Start menu etc.).

Windows Update

You can update to the latest patches and service packs for Windows with the following menus. [start] - [All Programs] - [Windows Update]

Do not apply “Driver Updates” even if a message to update a driver appears. If a driver update is required, contact your technical support office.

If the message “Your computer might be at risk” is displayed

Select (red icon) on the notification area and make the appropriate settings. The Windows Security Center reg-

ularly gives you notice so that you can make the optimum settings. This is not an error message and you can use the computer. However, making appropriate measures is recommended to reduce the risk of virus and other attacks.

PC Information Viewer

This computer periodically records the management information including the hard disk information such as number of hours powered-on, number of times powered-on, internal temperature, replacement sector. The maximum data volume for each record is 750 byte.

These information are only used for estimating the cause when the hard disk goes down by any possibility. They are never sent to outside via network nor used for any other purpose except for the purpose described the above.

To disable the function, add the check mark for [Disable the automatic save function for management information history] in [Hard Disk Status] of PC Information Viewer, and click [OK].

When you disable the function, information on how to use the hard disk is not displayed.

( Reference Manual “Check the Computer’s Usage Status” and Hard Disk Handling)

To conserve power, the following power saving methods are set at the time of purchase (When AC adaptor is connected).

•The screen automatically turns off after 15 minutes of inactivity.

•The computer automatically enters standby*1 after 20 minutes of inactivity.

*1 Refer to Reference Manual “Standby or Hibernation Functions” about resuming from standby.

Power consumption in each mode is as follows. (When AC adaptor is connected)

•When the screen is off Approx. 10 W

•In standby Approx. 1.9 W

•The battery pack is fully charged (or not being charged) and the computer is off Approx. 0.9 W

Appendix Troubleshooting Useful Information Getting Started

15