Troubleshooting (Basic)/Error Code/Message
Troubleshooting Useful Information Getting Started
Appendix
Reference Manual
The Reference Manual is not | Install Adobe Reader. | ||||||||||
displayed. | A Log on to Windows as an administrator. | ||||||||||
| B Click [start] - [Run], input [c:\util\reader\AdbeRdr70_enu_full.exe], then click [OK]. | ||||||||||
| Follow the | ||||||||||
| C Update Adobe Reader to its latest version. | ||||||||||
| If your computer is connected to the internet, start up Adobe Reader and click [Help] - | ||||||||||
| [Check for updates now]. | ||||||||||
Reinstalling B’s Recorder/B’s CLiP | |||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
A serial number is | Input the following serial number. | ||||||||||
requested when reinstalling. | B’s Recorder: | ||||||||||
| B’s CLiP: | ||||||||||
Others |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
No response. | Press |
| + |
|
|
| + |
|
| to open Task Manager and close the software application that | |
Ctrl | Shift | Esc | |||||||||
| is not responding. | ||||||||||
| An input screen (e.g., password input screen at startup) may be hidden behind another | ||||||||||
| window. Press | Alt | + | Tab | to check. | ||||||
| Slide the power switch for four seconds or longer to shut down the computer, and then | ||||||||||
| slide the power switch to turn it on. If the application program does not work normally, | ||||||||||
| uninstall and reinstall the program. To uninstall, click [start] - [Control Panel] - [Add or | ||||||||||
| Remove Programs]. | ||||||||||
Error Code/Message
Follow the instructions below when an error code or message appears. If the problem persists or if the error code/mes- sage displayed is not shown here, contact your technical support office.
Error Code/Message |
| Solution | |
0211 Keyboard error | Disconnect external keyboard. | ||
0251 System CMOS | An error has occurred in the memory of Setup Utility settings. This occurs when the memory con- | ||
checksum bad - | tent is changed by an unexpected program operation, etc. | ||
Default configuration | Start the Setup Utility and return the settings to the default values, and then change the set- | ||
used | tings as necessary. | ||
| If the problem persists, the internal clock battery may need to be replaced. Contact your tech- | ||
| nical support office. | ||
|
| ||
0271 Check date and | The date and time settings are not correct. | ||
time settings | Start the Setup Utility and set the correct date and time. | ||
| If the problem persists, the internal clock battery may need to be replaced. Contact your tech- | ||
| nical support office. | ||
0280 Previous boot | Startup has failed repeatedly, so the Setup Utility settings have been returned to the default val- | ||
incomplete - Default | ues to startup the computer. | ||
configuration used | Start the Setup Utility and return the settings to the default values, and then change the set- | ||
| tings as necessary. | ||
Press <F2> to Setup | Write down the error details and press |
| to start the Setup Utility. Change the settings if |
F2 | |||
| necessary. | ||
Operating System not | The operating system is not installed in the floppy disk or the hard disk that you are going to boot | ||
found | from. | ||
| If using a floppy disk, change the disk to the one you can use for boot. | ||
| If using the hard disk, check if the hard disk is recognized in [Information] menu of the Setup | ||
| Utility. If the hard disk is recognized, perform the reinstallation ( page 25). If not, contact | ||
| your technical support office. | ||
| If a device is connected to the USB port, disconnect the device, or set [Legacy USB Support] | ||
| to [Disable] in the [Advanced] menu of the Setup Utility. | ||
|
|
|
|
To start the Setup Utility
ARestart the computer.
BPress F2 while [Panasonic] boot screen is displayed.
30