Getting Started
First-time Operation
Touching the keyboard, touch pad or touchscreen (only for model with touchscreen) Closing the display
Turn on/off the wireless switch
When the CPU temperature is high, the computer may not start up to prevent overheating of the CPU. Wait until the computer cools down, and then turn the power on again. If the computer does not power on even after cooling down, contact Panasonic Technical Support ( pages 32 - 36).
Any changes from the default setting of the Setup Utility must not be made until the
6 Setup Windows.
Follow the
The computer restarts several times. Do not touch the keyboard or touch pad, and wait until the hard disk drive indicator has turned off.
After the computer is turned on, the screen remains black or unchanged for a while. This is not a malfunction. Wait for a moment until the Windows setup screen appears.
During setup of Windows, use the touch pad and clicking to move the cursor and to click an item.
Setup of Windows will take approximately 20 minutes.
Go to the next step, confirming each message on the display. “Join a wireless network” screen may not appear.
You can set the Wireless Network after the setup of Windows is complete.
CAUTION
You can change the user name, password, image and security setting after setup of Windows.
Remember your password. If you forget the password, you cannot use Win- dows. Creating a password reset disk beforehand is recommended.
Do not use the following words for user name: CON, PRN, AUX, CLOCK$, NUL, COM1 to COM9, LPT1 to LPT9, @. In particular, if you create a user name (ac- count name) that includes the “@” mark, a password will be requested at the
7<Only for model with touchscreen> Perform the touchscreen calibration.
Before performing the calibration, close Tablet PC Input Panel.
Calibration by an administrator
NOTE
At first, log on to Windows as an administrator and perform this calibration.
AClick (Start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Set- ting].
BClick [Calibrate].
CUsing the stylus, touch each of the “+” target marks one by one, and then click [Yes].
DClick [OK].
Calibration by a standard user
NOTE
Perform the following calibration for each user.
AClick (Start) - [Control Panel] - [Hardware and Sound] - [Tablet PC Set- ting].
BClick [Calibrate].
CUsing the stylus, touch each of the “+” target marks one by one, and then click [Yes].
16