Dealing with Problems (Summary)
When a problem occurs, power off the wireless display, then connect the optional port replicator
Starting Up
The power indicator or battery indicator is not lit
[Enter Password] is displayed
P O S T S t a r t u p Error(s) is displayed
Windows startup, or an operation is ex- tremely slow
The date and time are incorrect
The cursor cannot be controlled
Check the cable connection for the AC adaptor.
Check to see if a fully charged battery is properly installed. Remove the battery pack and disconnect the AC adaptor, then connect them again.
Input your password. If you have forgotten it, contact Pana- sonic Technical Support.
page 26
Press F9 in the Setup Utility ( “Setup Utility”). This will restore the Setup Utility's settings to their default values (except the password settings). Then, the Setup Util- ity must be run once again for you to input the appropriate operating environment settings. (The processing speed de- pends on the application software used, so this operation may not cause the processing speed to increase.)
You can set the date and time through [Control Panel] - [Date, Time, Language, and Regional Options] - [Date and Time].
When the computer is connected to a LAN, confirm the date and time of the server.
If you continue to experience problems, the internal bat- tery maintaining the clock may need to be replaced. Con- tact Panasonic Technical Support.
This computer will not correctly recognize the date and time starting from the year 2100 A.D.
Restart the computer by using the keyboard (e.g.,
Ctrl + Esc , or ).
When the port replicator is not connected, turn off the computer.
Troubleshooting
29