Panasonic AW-HB505 manual Genlock Adjustment, Horizontal Phase Adjustment

Color Monitor	GRAY	YELLOW	CYAN	GREEN	MAGENTA	RED	BLUE
								75%
									100%

	IRE		+100+100
	100			+89
	90
		+77		+77
Monitor	80		+69		+72
	70		+56
	60			+48
	50					+46
	40			+36
Waveform			+38
	-10
	30	+20			+28		1V[p-p]
	20					+15	+20
	10		+12
	0			+7
	-20			-5
					-16	-16
	-30	-20
	-40						-20

Color Monitor
										75%
											100%
	IRE				− Ι	WHITE	+Q	BLACK
	100					+100
	90
	80
Monitor	70
	40
	60
	50
Waveform	30	+27					+27	+20
	-10	+20					-20					1V[p-	p]
	20
	10				+7.5		+7.5
	0
	-20
				-13		-13
	-30		-20						-20
	-40

• Genlock Adjustment

To use the camera in external sync mode, phase adjust- ment is necessary to match the phases with those of the other units and camera. No G/L adjustment is necessary in case of no genlock.

• Horizontal Phase Adjustment

qSet G/L PHASE ON/OFF Switch of the multi hybrid con- trol panel to the ON position.

Note: When G/L PHASE ON/OFF Switch of the multi hybrid control panel is set to the ON position, the sync phase of the camera changes to the settings of G/L PHASE H Control, G/L PHASE Coarse

Switch, and G/L PHASE SC Control. Unless G/L phase adjustment is necessary, do not set G/L PHASE ON/OFF Switch to the ON position.

wObserve the waveforms of the G/L signal input (black burst signal ) and video signal output on a dual chan- nel oscilloscope, and turn the G/L horizontal phase control to match the horizontal phase as shown in the next page.

-18-