First-time Operation
Getting Started
3 |
A |
B |
2 |
1 |
3 |
5 |
3 Turn on the computer.
APull the carrying handle forward.
BPush the top of the latch (A) to release it.
CLift up the display to open.
DConfirm the wireless switch (B) is OFF.
EPress and hold the power switch 
for approximately one second until the power indicator 
lights.
CAUTION
Do not press the power switch repeatedly.
The computer will be forcibly turned off if you press and hold the power switch for four seconds or longer.
Once you turn off the computer, wait for ten seconds or more before you turn on the computer again.
Do not perform the following operation until the hard disk drive indicator 
turns off.
•Connecting or disconnecting the AC adaptor
•Pressing the power switch
•Touching the keyboard, touch pad or external mouse
•Closing the display
•Turn on/off the wireless switch
When the CPU temperature is high, the computer may not start up to prevent overheating of the CPU. Wait until the computer cools down, and then turn the power on again. If the computer does not power on even after cooling down, contact Panasonic Technical Support ( page 35).
4 Setup Windows.
AFollow the
After turning on the computer, “Please wait a moment while windows pre- pares to start for the first time .........” appears, and then a small circle circu- lates on the screen. This will take a few minutes.
During setup of Windows, use the touch pad and clicking to move the cursor and to click an item.
Setup of Windows will take approximately 20 minutes.
Go to the next step, confirming each message on the display.
CAUTION
You cannot choose the following words for user name and password: CON, PRN, AUX, CLOCK$, NUL, COM1 to COM9, LPT1 to LPT9.
You can change the user name, password, image and security setting after setup of Windows.
Remember your password. If you forget the password, you cannot use the Win- dows. Creating a password reset disk beforehand is recommended.
The wallpaper for the first logon user has already been set on “4 Setup Win- dows.” .
When using this computer under the Sun, the screen becomes easily viewable by changing the wallpaper to the white wallpaper.
A
BSelect [Solid Colors] at [Picture Location].
CSelect the white wallpaper and click [OK].
12