Safety Instructions

1.Please read these safety instructions carefully.

2.Please keep this User’s Manual for later reference.

3.Please disconnect this equipment from connecter before cleaning. Don’t use liquid or prayed detergent for cleaning. Use moisture sheet or cloth for cleaning.

4.Make sure the equipment is connected to the power source with the correct voltage, frequency, and ampere.

5.All cautions and warnings on the equipment should be noted.

6.Never pour any liquid into opening; this could cause fire or electrical shock.

7.Never open the equipment. For safety reason, the equipment should only be opened by qualified service personnel.

8.If one of the following situations arises, get the equipment checked by a service personnel :

a.Liquid has penetrated into the equipment.

b.The equipment has been exposed to moisture.

c.The equipment has not work well or you can not get it work according to user’s manual.

d.The equipment has dropped and damaged.

e.If the equipment has obvious sign of breakage.

9.Caution on use of battery: Use the battery recommended by the manufacturer or the same type of battery installed by the manufacturer. If incorrect battery is used, it may cause explosion or fire hazard. Recycle or discard used batteries according the manufacturer’s instruction or your local authority.

10.Safety caution concerning laser products:

DVD-ROM/CD-RW combo drive is “Class I Laser Product” This equipment, built with DVD and/or CD disc drives using laser beam to read or write data on optical discs, is classified as “Class 1 laser product”. While the laser optical drive is reading data from or writing data to an optical disc, do not force open the disc drive door. Press the Eject button to retrieve the optical disc only after the in-use indicator goes off.

11.Ambient operation temperature: less than 45 degrees C.