Panasonic CF-19 manual Log on

Troubleshooting (Basic)

Display

<Only for model with GPS> The cursor cannot be con- trolled properly.

Operate the following steps.

ASet [GPS] to [Disable] in the [Advanced] - [Serial Port Settings] of the Setup Utility.

BPress F10 and select [Yes] at the confirmation message, and press Enter. The computer will restart.

CLog on to Windows as an administrator.

DClick (Start) and input “c:\util\drivers\gps\GPSVista.reg” in [Start Search], and press Enter.

EClick [Yes], click [Yes] and click [OK]. Then restart the computer.

FPress F2 while [Panasonic] boot screen is displayed.

GSet [GPS] to [Enable] in the [Advanced] - [Serial Port Settings].

HPress F10 and select [Yes] at the confirmation message, and press Enter.

Troubleshooting

Touch Pad / Touchscreen (only for model with touchscreen)/Dual Touch (only for model with dual touch)

The cursor does not work.	When using the external mouse, connect it correctly.
	Restart the computer using the keyboard.
	Press	and press	two times, and press	to select [Restart] and press		.
					Enter

	Press		,	U		, and	R	to select [Restart].
	If the computer does not respond to keyboard commands, read “No response”
	( page 27).
Cannot input using the touch	Set [Touch Pad] to [Enable] in the [Main] menu of the Setup Utility.
pad.	The drivers for some mice may disable the touch pad. Check your mouse’s operating
	instructions.
<Only for model with touch-
screen>	Set [Touchscreen Mode] to [Auto] or [Tablet] in the [Main] menu of the Setup Utility.
Cannot input using the
touchscreen.	Set [Touchscreen Mode] to [Auto] or [Touchscreen Mode] in the [Main] menu of the
	Setup Utility.
Cannot point the correct	<Only for model with touchscreen>
position using the included	Perform the touchscreen calibration ( page 15).
stylus/digitizer pen.	<Only for model with dual touch>
	Perform the digitizer calibration and Touchscreen calibration ( page 15).
	Use the included digitizer pen.
	On the Windows logon screen or the Welcome screen, you may not be able to point the
	correct position using the included digitizer pen. Use the keyboard or the touch pad to
	log on.
Reference Manual
The Reference Manual is	Install Adobe Reader.
not displayed.	A Log on to Windows as an administrator.
	B Click				(Start) and input “c:\util\reader\Setup.exe” in [Start Search] then press
		Enter			.
	C Update Adobe Reader to its latest version.
	If your computer is connected to the internet, start up Adobe Reader and click [Help]
	- [Check for Updates...].
	B Click [start] - [Run], input [c:\util\reader\Setup.exe], then click [OK].
	C Update Adobe Reader to its latest version.
	If your computer is connected to the internet, start up Adobe Reader and click [Help]
	- [Check for updates now].

26