Panasonic CF-74ECBGDBM Preparation, Removing the HDD, Battery Pack, HDD Unit, DVD-ROM Drive Unit

Page 23

9 Disassembly/Reassembly

Note:

Power off the computer. Do not shut down to the Suspend or hibernation mode.

Do not add peripherals while the computer is in the Suspend or hibernation mode; abnormal operation may result.

9.1.Disassembly Instructions

9.1.1.Preparation

Before disassembling, be sure to make the following prepara- tions.

•Shut down Windows and turn off the power.

•Disconnect the AC adaptor.

•Remove the optional DIMM memory card and PCMCIA card if they are connected.

•Remove other devices if they are connected.

Attention:

•Please execute writing BIOS ID when you exchange the Main Board.

•You cannot reuse the Conductive Clothes and the heat dissi- pating parts such as Sheet and Rubber. Use new parts.

9.1.2.Removing the Battery Pack, the HDD Unit and the DVD-ROM Drive Unit

HDD Latch Knob Latch 2 Latch 1

HDD Unit

 

Battery Pack

 

 

 

6

4

 

 

5

 

1

 

 

9.1.3.Removing the HDD

HDD Case Upper

Hook

Hook

Hook

Hook

HDD

HDD FPC

HDD Damper

HDD Conductive Sheet

2

7

MP Latch

DVD-ROM Drive Unit

Battery Pack

3

HDD Earth Plate

1.Slide the Latch 1 to unlock. (1)

2.Slide the Latch 2 (2), and then without releasing it, slide

and remove the Battery Pack. (3)

HDD Unit

1. Slide the HDD Latch Knob (4), and then without releasing it, slide and remove the HDD Unit. (5)

DVD-ROM Drive Unit

1.Push the MP Latch (6), and then without releasing it, slide the DVD-ROM Drive Unit. (7)

HDD Case

1.Remove the six Hooks, and remove the HDD Case Upper.

2.Remove the HDD Damper.

3.Disconnect the HDD from the HDD FPC.

4.Remove the HDD Conductive Sheet and HDD Earth Plate.

9-1

Page 22 Page 24
Image 23
Page 22 Page 24
Contents CF-74ECBGDBM Page Laser Safety Information Page Page Contents High-Speed CD-RW 4X/10X Bluetooth*12 Version 2.0+EDRJack, 3.5 DIA, Impedance 32 Ω, Output Power 4 mW × Model NoOperation has been tested and confirmed using Panasonic Maximum resolution depends on the specificationsOnly for model with wireless LAN Only for model with BluetoothNames and Functions of Parts Right side Block Diagram Page Troubleshooting Outline of Post Error Diagnosis by Checking Beep Signal SoundTable of errors classified by beep sounds Diagnosis Beep signal sound Error messageStuck key 02D0 System cache error Cache disabled Self Diagnosis Test Operation of PC-Diagnostic Utility Selection of tested device PC-Diagnostic utility End methodContent of the setup is returned to the setting of the user Ty of breakdown Content of standard test Content of enhancing testRecord area frequently accessed All record area is tested Test item StanardTest Item Content of Standard Test Content of Extend TestExpress Card Connector Wiring between Super I/OWiring Connection Diagram HDD Unit Battery PackPreparation Removing the HDDRemoving the Speaker and the LED PCB Removing the Dimm Memory CardRemoving the Keyboard Removing the Main PCB Removing the Bottom CaseRemoving the DC-IN PCB and I/O Removing the PC Card Ejector and Lithium BatteryRemoving the FAN Motor and SD PCB Removing the LCD and the Inverter Removing the USB PCBRemoving the Display unit Removing the LCD Front CabinetPreparation Removing the Touch PAD and PAD PCBRemoving the Finger PCB Preparing and setting the Finger Sensor Base Setting the Finger PCBSetting the LCD Unit Inverter Attaching the LCD Damper C and LCD Damper D Arranging the W-LAN L and R CableAttaching the Cloth Arranging the LCD/TS CableSetting the Inverter and Arranging the Inverter Cable Arranging the TP Power Cable and Attaching the TP/LCD SheetLCD Rear Cabinet Ensure all the 23 Hooks are securely set Setting the LCD Front CabinetSetting the Display unit Fixing of the LCD Front CabinetUSB Cable Tape Setting the USB PCBSafety Working MP Slide Sheet Arranging the USB CablePipe Sheet Setting the SD PCB, Heat Sink and FAN MotorApplying Grease on the Heat Sink Fan Dust SheetINV. Cable Setting the DC-IN PCB and I/O PCBArranging the DC-IN Cable FAN Cable Sheet DC-IN Cable ~3mmLithium Battery Setting the PC Card Ejector and Lithium BatterySetting the Main PCB Arranging the Lithium Battery Safety WorkingFAN Motor Main PCB Tape No.1 LAN Cable No.8 TP Power CableFAN Cable Connector CN28 Arranging the FAN CableBad example Setting the Wireless Module and MDC ModuleArranging the Modem Cable Good exampleSetting the Handle Assy Setting the Bottom CaseRed Line Setting the Speaker and the LED PCBSoldering the Speaker Cable and Setting the Speaker Rubber SpeakerCenter Cover Hooks KBD Angle L Keyboard KBD Angle R Setting the KeyboardSetting the HDD Setting the Dimm Memory Card and Dimm CoverSet the DVD-ROM Driver Unit Set the HDD Pack Exploded View 10-2 Screw tightening torque 10-310-4 K17-7 K17-6

CF-74ECBGDBM specifications

The Panasonic CF-74ECBGDBM is a rugged laptop designed to cater to the demanding needs of professionals who work in challenging environments. Built with durability as a top priority, this device serves as an ideal solution for industries such as public safety, construction, and field service.

One of the standout features of the CF-74ECBGDBM is its rugged design. The laptop is compliant with military standards, specifically MIL-STD-810G, ensuring it can withstand harsh conditions. This includes resistance to drops, vibration, dust, and moisture, allowing users to operate it in rain or shine without fear of damage. The spill-resistant keyboard adds another layer of protection, making it suitable for environments where liquids are prevalent.

In terms of performance, the CF-74ECBGDBM is equipped with a powerful processor, which provides efficient multitasking capabilities. The device typically features an Intel Core i5 processor, enabling smooth operation of demanding applications. Coupled with a sufficient amount of RAM, users can expect enhanced speed and productivity, even when running multiple programs simultaneously.

The laptop features a sunlight-readable display, which ensures visibility in bright outdoor conditions. The screen is designed to reduce glare, making it user-friendly for professionals who work outside regularly. Additionally, the display is supported by a durable touchscreen option, allowing for easier navigation in various working conditions.

Storage is another critical aspect of the CF-74ECBGDBM, as it often comes with solid-state drive options that not only provide ample memory for files and applications but also enhance the overall speed and reliability of the system. Users can rely on fast read and write speeds, which are essential for data-heavy tasks.

Connectivity options are abundant on this device, featuring USB 3.0 ports, HDMI output, and options for mobile broadband. This allows users to connect various peripherals or external displays easily, as well as maintain seamless internet access on the go.

Furthermore, the CF-74ECBGDBM is equipped with a long-lasting battery that supports extended periods of use, ideal for professionals who spend time away from traditional power sources. The device is designed for easy serviceability, facilitating upgrades and repairs, which enhances its lifespan in demanding workplaces.

Overall, the Panasonic CF-74ECBGDBM stands out as a robust and versatile laptop that meets the needs of users in tough outdoor and industrial settings, making it a reliable companion for professionals on the move.
Top Page Image Contents