Panasonic CF-U1 appendix Models for Canada, Canadian ICES-003, Industry Canada

<Only for model with wireless LAN> This product is restricted to indoor use due to its operation in the 5.15 to 5.25 GHz frequency range. FCC requires this product to be used indoors for the frequency range 5.15 to 5.25 GHz to reduce the potential for harmful interfer- ence to co-channel Mobile Satellite systems. High power radars are allo- cated as primary users of the 5.25 to

5.35GHz and 5.65 to 5.85 GHz bands. These radar stations can cause interfer- ence with and /or damage this product.

25-M-W-2

Models for Canada

Canadian ICES-003

This Class B digital apparatus com- plies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

7-M-2

<Only for model with wireless LAN/ Bluetooth/GPS>

Industry Canada

This product complies with RSS310 Industry Canada.

Operation is subject to the following two conditions;

(1)this device may not cause interfer- ence, and

(2)this device must accept any inter- ference, including interference that may cause undesired operation of the device.

30-Ca-1-1

<Only for model with wireless LAN> This product (local network devices) for the band 5150-5250 MHz is only in- door usage to reduce potential for harmful interference to co-channel Mobile Satellite systems.

Responsible Party:

Panasonic Corporation of North America

One Panasonic Way

Secaucus, NJ 07094

Tel No:1-800-LAPTOP5 (1-800- 527-8675)

6-M-1

Getting Started

High power radars are allocated as primary users (meaning they have priority) of 5250-5350 MHz and 5650- 5850 MHz and these radars could cause interference and/or damage to LELAN devices.

30-Ca-2-1

This device has been designed to operate with the WWAN antenna having a maximum gain of 1.50 dB for the cellular band and 3.50 dB for the PCS band. WWAN anenna having a higher gain is strictly prohibited per regulations of Industry Canada. The Required antenna impedance is 50 ohms.

To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (EIRP) is not more than that required for successful communication.

25-Ca-1-1

5