Panasonic TQBH0205-4 operation manual Do not use near other wireless equipment

Page 4

Notes on Using Wireless Connection

Wireless connection function of the projector uses radio waves in the 2.4 GHz band.

A radio station license is not required, but be sure to read and fully understand the following items before use.

Do not use near other wireless equipment.

The following equipment may use radio waves in the same band as the projector.

When the projector is used near these devices, radio wave interference may make communication impossible, or the communication speed may become slower.

Microwave ovens, etc.

Industrial, chemical and medical equipment, etc.

In-plant radio stations for identifying moving objects such as those used in factory manufacturing lines, etc.

Designated low-power radio stations

If at all possible, avoid the use of cellular phones, TV sets or radios near the projector.

Cellular phones, TV sets, radios and similar devices use different radio bands from the projector, so there is no effect on wireless communication or the transmission and reception of these devices. However, radio waves from the projector may produce audio or video noise.

Wireless communication radio waves cannot penetrate steel reinforcements, metal, concrete, etc.

Communication is possible through walls and floors made from materials such as wood and glass (except glass containing wire mesh), but not through walls and floors made from steel reinforcements, metal, concrete, etc.

Avoid using the projector in locations prone to static electricity.

If the projector is used in a location prone to static electricity, such as on a carpet, the wireless LAN or wired LAN connection may be lost.

If this happens, eliminate the source of static electricity or electromagnetic noise and reconnect to the wireless LAN or wired LAN.

In rare cases static electricity or electromagnetic noise may make it impossible to establish a connection to the LAN. If this happens, press the power button on the remote control or on the projector to power off the projector temporarily. After the cooling fan stops operating (after the power monitor on the projector changes from orange to red), power on the projector and reconnect to the LAN.

Using the projector outside the country

It is forbidden to take the projector outside the country or region where you purchased it, so use it only in the said country or region. Also, note that depending on countries or regions there are restrictions on the channels and frequencies at which you can use the wireless LAN.

Image 4
Contents Windows Contents Software Licensing Agreement Do not use near other wireless equipment Using the projector outside the countryWired LAN Channels that can be usedAbout Wireless LANs Request Regarding SecurityMulti live mode See Project with various methods Live mode SeeNetwork Transmission Project with multiple projectors What you can do with Wireless Manager mobile edition 5.5Useful functions Virtual remote control function See Live mode cut-in function SeeWebBrowser control See PJLink SeeCheck your computer Wireless LANNecessary environment for computers to be connected Computer without a built-in wired LAN function For wired LANCheck your computer Software requirements Precautions when using Windows Vista/WindowsSystem requirements Wireless Manager ME Installing and using softwareClick 1. Wireless Manager ME Installation free set up Installation free set upConnecting with wireless LAN Easy Wireless Set UpPreparations Parts name in search screenConnecting with wireless LAN Projector Setting menu displayProjector Search Window S-MAP List display See Available modes and functionsProjector Search Window 1-4/U See MAP Connection Select and click the icon Projector you want to connect toClick 1-4/U from the setting menu When the Confirmation dialog box appearsIf the setting menu is not displayed, click Setting U ConnectionClick PC Search from the setting menu PC Search ConnectionSelect the projector to connect Operations on the projectorConnection error messages Detected issue Displayed information RemarksClose the utility, and then make the connection again Connecting through the access point User 1 through User 3 for Wireless LAN and press EnterAs for network setting items, see pages 53 Set the details of network and select OKPress OK in wireless LAN detailed setting 3/3 When logging on without administrator authorityThen click Next BComputer operation For Windows XP BComputer operation For Windows Vista Connecting with Wired LAN Launch Wireless Manager MEAs for network setting items, see Press OKOperations when password entry is required for connection Other operations for connectionOther search Click at the Projector Search windowOther operations for connection Click SearchCheck the search results Click ConnectExit Wireless Manager When connecting the projector for the first timeClick on the launcher Click YesDescription of the launcher Various projection methodsStatus indication Various projection methods Operating ButtonQuitting live mode Live ModeDisplayed. See Switching from one style to another Multi Live ModeHow to operate Switching to a different position Screen multi styleEnlarged display NQuitting 4-screen multi-liveClick Live Mode in the launcher menu Screen index styleQuitting the 4-screen index style projection Quitting the 16-screen index style projection Toggle between These with Enter buttonMultiple Source Live Mode Click Select Access Port in the launcher menuQuitting multiple source live mode Possible . SeeMultiple Source Multi Live Mode Projector Search window 1-4/U is displayedQuitting multiple source multi live mode Secondary viewer functionUseful Functions Selective Area TransmissionClick Selective Area Transmission in the launcher menu Quitting selective area transmissionUseful Functions Secondary display transmissionClick Display Change in the launcher menu Click SecondaryAV Mute function Pointer functionClick AV mute in the launcher menu Click AV mute in the launcher menu againConnectable projectors List of available functions in each projection methodSetting options Setting optionsTransmission Key setting Setting optionsOther1 User settings Firewall/Wireless LAN Utility MessageOther2 Version informationNetwork/Security setting of the projector Displaying the Network MenuPress the Menu button on the projector Select Network with the buttonsWired LAN settings Network/Security setting of the projectorDefault wired LAN settings Setting network number for wireless LAN User settingsSetting IP Press Wireless LAN→USER1 USER3→ENTER at the network menuWireless settings Ssid ※Default settings of USER1 USER3 Password setting Changing the projector nameNetwork control Network standbySelect on or OFF with Buttons Live mode cut-in Select Live Mode CUT in at the network menuComputer search Multi-liveReturning to the initial settings Verifying settingsSelect OK with Buttons and press the Enter Using WebBrowser Before using the WebBrowser controlProxy server settings Open Internet Properties windowUsing WebBrowser Accessing from the WebBrowserLevel and check the Enable checkbox under Active scripting Enter the user name and the password Click OKMonitor information window Projector status Network statusIf Failed appears On this window, click the Projector status tabBasic control window Advanced control window Projector control windowOn this window, click the Basic control tab Detailed settings window CompleteNext. the detailed settings and clickLAN settings Making the above settings effectiveEmail settings Time settingsConnection test If Normal is selected under Mail Contents If Simple is selected under Mail ContentsSwitching Languages Authentication server settingsCommand port settings Password settingsUsing PJLink protocol Applicable commandsPJLink security authentication Command Control detailsSoftware Uninstall Wireless Manager MEGlossary Infrastructure mode GlossaryOpen System Shared KeyFrequently Asked Questions To display Device Manager Windows XPWindows Vista WindowsFrequently Asked Questions How to change settings in Network BridgeHow to delete the network bridge To verify whether your system has Network Bridge Windows XPHow to disable the firewall in Windows XP How to registerNetwork setting error When the user does not have the administrator authorityWhen Firewall/Connection Utility is detected Connection has been lost in the multi live mode Contents of DVD or MPEG2 cannot be played on computerConnection cannot be established with IEEE802.11 g Transfer rate is slowScreen saver is not displayed properly in live mode Making a wireless LAN connection while using the internetChanging the display style Web control window does not appearAero setting is cancelled Trademarks