Panasonic TH-LB20NT MAP Connection, Select and click the icon Projector you want to connect to

Connecting with wireless LAN (cont.)

“S-MAP” Connection

1	Click [ ] on the desktop.
	Alternatively, select [Start] → [All Programs] → [Panasonic Wireless Display] →

[Wireless Manager mobile edition 5.5].

<Projector Search> window – [S-MAP] is displayed. (Parts name → See page 15)

● When the <Input User Name> window appears

Set the icon and user name, and click [OK].

•The icon and user name are set when Wireless Manager mobile edition 5.5 is first launched.

•The icon and user name settings can be changed in the <Option> window. (See page 50)

2

3

Select and click the icon [			] of the projector you want to connect to.
(	represents the projectors that were searched and found through wired LAN, while					indicates those found
through wireless LAN.)
The Connect/Connectability menu is displayed.
For List Display, [		] is displayed in the selected projector.
(In list view, select a projector you want to connect from the list and press [Connect].)
<Projector Search> Window – [S-MAP]					<Projector Search> Window – [S-MAP] (List display)
Current setting [Single] - [S-MAP]					Current setting [Single] - [S-MAP]
Setting		PCSearch	U	pdate	Setting	PCSearch		Update
Select access port					Select access port
	Name6789
	Proj6789
	Name1234				Live Mode		Standby
	Proj1234
		Name2345	Name2212
	AAAABBB	Proj2345	Proj2212
	PRJ02555Connect
	Connectability
	Cancel
	Name8833	Name6679		Name7771
	Proj8833	Proj6679		Proj7771
				Close	Connectability		Connect	Close

Select and click [Connect].

● If the <Confirmation Dialog> box is displayed

Click [Yes(Y)].

• For details on how to connect, refer to page 50.

•Refer to the models on page 47 supporting the wired LAN that is compatible with this software.

•If you want to enable the network adapter after starting the Wireless Manager, you should do it after exiting the Wireless Manager.

4 Connection completed.

When the connection with the projector is established, the launcher appears. (“Description of the launcher”→ See page 32)

•The “Signal strength level” is just a guide. As differences occur due to conditions such as the communication environment, this does not always display accurate values.

•Enter the user name in up to 8 alphanumerics.

•The launcher is not projected on the projector. However, if you are using Windows Vista, the installed launcher is projected.

•If you cannot connect the projector and computer using Easy Wireless Setup (See page 72).

•If you do not find a projector you want to connect, press [Update] button.

•When a firewall is active, a window may open prompting to deactivate a network block. (See screen A on page 75.)

•When a network connection is established by using the connection utility, a window may open prompting to halt the connection utility. (See screen B on page 76.)

18